Do you want to Pair Altec Lansing NanoPods Earbuds? The Altec Lansing NanoPods have 4 ساعات من عمر البطارية و 16 hours using the charging case. They have Bluetooth 5.0, the IPX5 sweat and dust-proof certification, 50ft of work range, و اكثر. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
كيفية إقران سماعات الأذن Altec Lansing NanoPods?
If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
خطوة 1: أخرج سماعات الأذن من علبة الشحن. بعد ذلك, they will turn ON automatically, and a light will light up on them.
خطوة 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.
خطوة 3: الآن, select NanoPods. إذا طُلب منك كلمة مرور, يكتب 0000.
بعد ذلك, the pairing process will be done, the earbuds will be paired to your device and ready for use.
How To Pair Altec Lansing NanoPods Earbuds With PC (شبابيك)
خطوة 1: أولاً, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
خطوة 2: الآن, go to the settings.
خطوة 3: Go to Bluetooth and other devices.
خطوة 4: انقر فوق إضافة جهاز.
خطوة 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
خطوة 6: ثم, select NanoPods. If needed a password, يكتب 0000.
After all these steps, the pairing process will be done, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods سماعات الأذن.
خطوة 1: أولاً, take out both earbuds from the charging case.
خطوة 2: ثم, identify the left and right earbuds.
خطوة 3: Choose the ear tips that best fit your ears.
خطوة 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, وتأكد من أن الميكروفون يشير إلى الفم.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
شغله
أخرج سماعات الأذن من علبة الشحن. بعد ذلك, you see a light will light up on the earbuds, and they will turn on automatically.
أطفأ
To turn Off the Earbuds place them into the charging case. سيتم إيقاف تشغيلها تلقائيًا.
كيفية التحكم? / How to Operate? – Instructions
ملحوظة: The multifunction touch sensor is placed on the top part of the earbuds.
- Press and hold the multifunction touch button on the right earbud for about 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Press the multifunction touch button on any of the earbuds one time to answer an incoming call.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Press and hold the multifunction touch button on the left earbud for about 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. سيبدأ العمل من تلقاء نفسه.
How To Charge The Earbuds?
سماعات الأذن
لشحن سماعات الأذن, place them into the charging case and close the lid properly. ستبدأ سماعات الأذن في الشحن تلقائيًا.
حالة الشحن
لشحن علبة الشحن, connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.
What Do The Lights Mean?
سماعات الأذن
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- A red light turns ON, on the charging case. عندما يتم شحن سماعات الأذن.
- A red light turns off on the charging case. عندما تكون سماعات الأذن مشحونة بالكامل.
- A blue light flashed three times. When the earbuds are resetting mode.
- A red light turns blue. When the earbuds are reset.
حالة الشحن
- One light flashing while charging is less than 25% of the battery.
- One light on and one flashing while charging is less than 50% of the battery.
- Two lights on and one flashing while charging the case has less than 75% of the battery.
- Three lights on and one flashing while charging is less than 100% of the battery.
- All lights are on while the charging case is fully charged.
How To Reset Altec Lansing NanoPods Earbuds?
خطوة 1: Delete all pairing records of the NanoPods from the connected device.
خطوة 2: Then take out both earbuds from the case. بعد ذلك, they will turn on automatically.
خطوة 3: الآن, press and hold the multifunction touch button on both earbuds for about 9 ثواني. بعد ذلك, a blue light will flash three times, to then turn red and back to blue.
خطوة 4: Place the earphones back in the charging case. بعد ذلك, سيتم إعادة الضبط.
نصائح استكشاف الأخطاء وإصلاحها
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
If that doesn’t work, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. To fix this, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Try factory resetting the earbuds.
The microphone is not working
If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:
Check the device microphone volume. If that doesn’t work, that means there might be a defect in the earbuds, so try replacing them or getting a refund.
FAQs to Pair Altec Lansing NanoPods Earbuds
Are the Altec Lansing NanoPods waterproof?
لا, the Altec Lansing NanoPods are not waterproof (IPX6 وما فوق). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.
Do the Altec Lansing NanoPods have a microphone?
نعم, تأتي سماعات الأذن مزودة بميكروفونات مدمجة.
Do the Altec Lansing NanoPods have a low latency/gaming mode?
لا, لا تحتوي سماعات الأذن هذه على زمن وصول منخفض/وضع ألعاب.
How to know when the Altec Lansing NanoPods are fully charged?
عندما يتم شحن سماعات الأذن, some lights turn on the charging case. When fully charged, all lights turn off.
Can the Altec Lansing NanoPods connect to a PC and Laptop?
نعم, يمكن لسماعات الأذن هذه الاتصال بأجهزة الكمبيوتر, أجهزة الكمبيوتر المحمولة, وحتى الأجهزة اللوحية.
Are the Altec Lansing NanoPods noise canceling?
لا! لا تأتي سماعات الأذن هذه مزودة بتقنية إلغاء الضوضاء.
خاتمة
We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. لذا, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. نأمل أن تساعدك هذه المقالة كثيرًا!