How to Pair Anker Zolo Liberty Earbuds? The Anker Zolo Liberty Earbuds come with a battery life of about 8 saat + qədər 100 hours using the charging case, Bluetooth 4.2, two 5.5mm graphene dynamic drivers, support for the AAC and SBC audio codecs, the IPX5 sweat and dust-proof certification, və daha çox.
Pairing Anker Zolo Liberty Qulaqcıqlar to various devices is easy, but most people don’t know how to Pair Anker Zolo Liberty Earbuds. Don’t worry after reading this article you will be able to Pair Anker Zolo Liberty Earbuds to your devices. Gəlin başlayaq!
How do you Pair Anker Zolo Liberty Earbuds?
Pairing Anker Zolo Liberty Earbuds is a simple and easy process.
- Please take out the earbuds from the case, they will automatically turn on and in pairing mode. Həmçinin, you can press and hold the multifunction button for about 1 ikinci.
- Sonra, go to settings and turn on the Bluetooth on your device.
- Select Zolo Liberty Earbuds from the list on your device and tap on it to pair.
- If prompted a Password Enter 0000.
How Do You Pair Anker Zolo Liberty Earbuds to IOS and Android Devices?
- Birinci, şarj qutusunu açın və qulaqcıqları çıxarın. Ondan sonra, they will turn on automatically. If does not turn on automatically, you can press and hold the multifunction touch button on both earbuds for about 1 ikinci.
- Sonra, cihazınızda Bluetooth-u yandırın.
- Cihazın Bluetooth parametrlərinə keçin.
- Select Zolo Liberty. Əgər parol lazımdırsa, növü 0000. Ondan sonra, cütləşmə həyata keçiriləcək.
How Do You Pair Anker Zolo Liberty Earbuds with a PC?
- Turn on Bluetooth on your PC.
- Go to the settings.
- Go to Bluetooth and other devices.
4. İndi, şarj qutusunu açın və qulaqcıqları çıxarın. Ondan sonra, they will turn on automatically. Həmçinin, you can press and hold the multifunction touch button on both earbuds for about 1 ikinci.
5. Select Zolo Liberty. Əgər parol lazımdırsa, növü 0000. Ondan sonra, cütləşmə həyata keçiriləcək.
How to Wear Zolo Liberty Earbuds?
Hər iki qulaqcığı şarj qutusundan çıxarın. Sol və sağ qulaqcıqları müəyyənləşdirin. Qulaqlarınıza ən uyğun olan qulaq uclarını seçin. Insert the earbuds into the inner canal of the ears. Mümkün olan ən yaxşı rahatlıq və ən yaxşı uyğunlaşma üçün döndərin, və mikrofonun ağzını göstərdiyinə əmin olun.
How to Reset the Zolo Liberty Earbuds?
Qulaqlıqları doldurma qutusundan çıxarın. Press and hold the multifunction touch button on both earbuds for about 5 saniyə, or until a red light starts flashing on the earbuds.
Press and hold the multifunction touch button on both earbuds for about 8 seconds or until a pink light starts flashing on the earbuds. Hər iki qulaqcığı şarj qutusuna qoyun.
The right earbud will automatically re-pair to the left earbud. Delete all Zolo Liberty pairing information from the connected device. Ondan sonra, sıfırlama həyata keçiriləcək.
How to Control?
- To play or pause a song press the multifunction touch button on any of the earbuds 1 vaxt.
- Play the next song press and hold the multifunction touch button on the right earbud for about 1 ikinci.
- Play the next previous press and hold the multifunction touch button on the left earbud for about 1 ikinci.
- Answer an incoming call by pressing the multifunction touch button on any of the earbuds 1 vaxt.
- End a current call press the multifunction touch button on any of the earbuds 1 vaxt.
- Reject an incoming call press and hold the multifunction touch button on any of the earbuds for about 1 ikinci.
- Transfer a call from the earbuds to the connected device press and hold the multifunction touch button on any of the earbuds for about 1 ikinci.
- Switch between a held call and an active call press and hold the multifunction touch button on any of the earbuds for about 1 ikinci.
- To activate the voice assistant press the multifunction touch button on any of the earbuds 2 dəfə.
FAQS to Pair Anker Zolo Liberty Earbuds?
Are Anker Zolo Liberty Earbuds waterproof?
Yox, the Anker Zolo Liberty is not waterproof. They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.
What Do If the Microphone is not working?
If the Microphone is not working it can be because the microphone is muted, or the earbuds are badly positioned. Bunu düzəltmək üçün, you can do the following
If the microphone is muted, check the device microphone volume. Bu işləmirsə, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.
How to Know when the Anker Zolo Liberty Earbuds are fully charged?
Qulaqlıqlar doldurulduqda, some lights are on. When fully charged, all lights turn off from the charging case.
Nəticə
We hope after reading this article you will know how to Pair Anker Zolo Liberty Earbuds to your devices.
The pairing process is so simple and easy just follow the above-mentioned steps carefully without skipping any step, otherwise you can not complete the pairing process. Ümid edirik ki, bu məqalə sizə çox kömək edəcəkdir!
