Do you want to Pair Altec Lansing NanoPods Earbuds? The Altec Lansing NanoPods have 4 hours of battery life and 16 hours using the charging case. They have Bluetooth 5.0, the IPX5 sweat and dust-proof certification, 50ft of work range, і больш. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
Як спалучыць навушнікі Altec Lansing NanoPods?
If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
Крок 1: Take out the earbuds from the charging case. Пасля гэтага, they will turn ON automatically, and a light will light up on them.
Крок 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.
Крок 3: зараз, select NanoPods. Калі будзе прапанавана ўвесці пароль, тыпу 0000.
Пасля гэтага, працэс спалучэння будзе выкананы, the earbuds will be paired to your device and ready for use.
How To Pair Altec Lansing NanoPods Earbuds With PC (вокны)
Крок 1: Перш за ўсё, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
Крок 2: зараз, go to the settings.
Крок 3: Перайдзіце да Bluetooth і іншых прылад.
Крок 4: Click on Add device.
Крок 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
Крок 6: Затым, select NanoPods. If needed a password, тыпу 0000.
After all these steps, працэс спалучэння будзе выкананы, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods Навушнікі-ўкладышы.
Крок 1: Першы, take out both earbuds from the charging case.
Крок 2: Затым, identify the left and right earbuds.
Крок 3: Choose the ear tips that best fit your ears.
Крок 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, і пераканайцеся, што мікрафон накіраваны ў рот.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
Turn on
Take out the earbuds from the charging case. Пасля гэтага, you see a light will light up on the earbuds, і яны ўключацца аўтаматычна.
Turn off
To turn Off the Earbuds place them into the charging case. They will turn off automatically.
How to Control? / How to Operate? – Instructions
НАТАТКА: The multifunction touch sensor is placed on the top part of the earbuds.
- Націсніце і ўтрымлівайце шматфункцыянальную сэнсарную кнопку на правым навушніку прыбл 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Націсніце шматфункцыянальную сэнсарную кнопку на любым з навушнікаў адзін раз, каб адказаць на ўваходны выклік.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Націсніце і ўтрымлівайце шматфункцыянальную сэнсарную кнопку на левым навушніку прыбл 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. Ён пачне працаваць сам.
How To Charge The Earbuds?
Навушнікі-ўкладышы
Каб зарадзіць навушнікі, place them into the charging case and close the lid properly. Навушнікі-ўкладышы пачнуць зараджацца аўтаматычна.
Зарадны чахол
Каб зарадзіць зарадны футляр, connect the case to a USB charger or charging port with the included USB-A to C cable. Ён пачне зараджацца аўтаматычна.
What Do The Lights Mean?
Навушнікі-ўкладышы
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- A red light turns ON, on the charging case. Калі навушнікі зараджаюцца.
- A red light turns off on the charging case. When the earbuds are fully charged.
- A blue light flashed three times. When the earbuds are resetting mode.
- A red light turns blue. When the earbuds are reset.
Зарадны чахол
- One light flashing while charging is less than 25% of the battery.
- One light on and one flashing while charging is less than 50% of the battery.
- Two lights on and one flashing while charging the case has less than 75% of the battery.
- Three lights on and one flashing while charging is less than 100% of the battery.
- All lights are on while the charging case is fully charged.
How To Reset Altec Lansing NanoPods Earbuds?
Крок 1: Delete all pairing records of the NanoPods from the connected device.
Крок 2: Then take out both earbuds from the case. Пасля гэтага, they will turn on automatically.
Крок 3: зараз, press and hold the multifunction touch button on both earbuds for about 9 секунд. Пасля гэтага, a blue light will flash three times, to then turn red and back to blue.
Крок 4: Place the earphones back in the charging case. Пасля гэтага, the resetting will be done.
Парады па ліквідацыі непаладак
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
If that doesn’t work, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. To fix this, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Паспрабуйце скінуць заводскія налады навушнікаў.
The microphone is not working
If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:
Check the device microphone volume. If that doesn’t work, that means there might be a defect in the earbuds, so try replacing them or getting a refund.
FAQs to Pair Altec Lansing NanoPods Earbuds
Are the Altec Lansing NanoPods waterproof?
няма, the Altec Lansing NanoPods are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.
Do the Altec Lansing NanoPods have a microphone?
так, the earbuds come with integrated microphones.
Do the Altec Lansing NanoPods have a low latency/gaming mode?
няма, these earbuds don’t have a low latency/gaming mode.
How to know when the Altec Lansing NanoPods are fully charged?
Калі навушнікі зараджаюцца, some lights turn on the charging case. When fully charged, all lights turn off.
Can the Altec Lansing NanoPods connect to a PC and Laptop?
так, these earbuds can connect to PCs, laptops, and even tablets.
Are the Altec Lansing NanoPods noise canceling?
няма! These earbuds don’t come with noise-cancellation technology.
Заключэнне
We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. Такім чынам, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. Мы спадзяемся, што гэты артыкул вам вельмі дапаможа!
