How to pair Anker Zolo Liberty Earbuds?

How to Pair Anker Zolo Liberty Earbuds? The Anker Zolo Liberty Earbuds come with a battery life of about 8 гадзіны + up to 100 hours using the charging case, Bluetooth 4.2, two 5.5mm graphene dynamic drivers, support for the AAC and SBC audio codecs, the IPX5 sweat and dust-proof certification, і многае іншае.

Pairing Anker Zolo Liberty Навушнікі-ўкладышы to various devices is easy, but most people don’t know how to Pair Anker Zolo Liberty Earbuds. Don’t worry after reading this article you will be able to Pair Anker Zolo Liberty Earbuds to your devices. Давайце пачнем!

How do you Pair Anker Zolo Liberty Earbuds?

Pairing Anker Zolo Liberty Earbuds is a simple and easy process.

1. Please take out the earbuds from the case, they will automatically turn on and in pairing mode. Also, you can press and hold the multifunction button for about 1 другі.
2. Затым, go to settings and turn on the Bluetooth on your device.
3. Select Zolo Liberty Earbuds from the list on your device and tap on it to pair.
4. If prompted a Password Enter 0000.

How Do You Pair Anker Zolo Liberty Earbuds to IOS and Android Devices?

1. Першы, адкрыйце зарадны футляр і дастаньце навушнікі-ўкладышы. Пасля гэтага, they will turn on automatically. If does not turn on automatically, you can press and hold the multifunction touch button on both earbuds for about 1 другі.
2. Затым, turn on Bluetooth on your device.
3. Go to the device’s Bluetooth settings.
4. Select Zolo Liberty. If a password is needed, тыпу 0000. Пасля гэтага, the pairing will be done.

How Do You Pair Anker Zolo Liberty Earbuds with a PC?

4. зараз, адкрыйце зарадны футляр і дастаньце навушнікі-ўкладышы. Пасля гэтага, they will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 1 другі.

5. Select Zolo Liberty. If a password is needed, тыпу 0000. Пасля гэтага, the pairing will be done.

How to Wear Zolo Liberty Earbuds?

Дастаньце абодва навушнікі-ўкладышы з чахла для зарадкі. Identify the left and right earbuds. Выберыце вушныя наканечнікі, якія найбольш падыходзяць вашым вушам. Устаўце берушы ва ўнутраны канал вушэй. Rotate for the best possible comfort and best fit, і пераканайцеся, што мікрафон накіраваны ў рот.

How to Reset the Zolo Liberty Earbuds?

Take the earbuds out of the charging case. Press and hold the multifunction touch button on both earbuds for about 5 секунд, or until a red light starts flashing on the earbuds.

Press and hold the multifunction touch button on both earbuds for about 8 seconds or until a pink light starts flashing on the earbuds. Place both earbuds into the charging case.

The right earbud will automatically re-pair to the left earbud. Delete all Zolo Liberty pairing information from the connected device. Пасля гэтага, the resetting will be done.

How to Control?

1. To play or pause a song press the multifunction touch button on any of the earbuds 1 time.
2. Play the next song press and hold the multifunction touch button on the right earbud for about 1 другі.
3. Play the next previous press and hold the multifunction touch button on the left earbud for about 1 другі.
4. Answer an incoming call by pressing the multifunction touch button on any of the earbuds 1 time.
5. End a current call press the multifunction touch button on any of the earbuds 1 time.
6. Reject an incoming call press and hold the multifunction touch button on any of the earbuds for about 1 другі.
7. Transfer a call from the earbuds to the connected device press and hold the multifunction touch button on any of the earbuds for about 1 другі.
8. Switch between a held call and an active call press and hold the multifunction touch button on any of the earbuds for about 1 другі.
9. To activate the voice assistant press the multifunction touch button on any of the earbuds 2 разы.

FAQS to Pair Anker Zolo Liberty Earbuds?

Are Anker Zolo Liberty Earbuds waterproof?

няма, the Anker Zolo Liberty is not waterproof. They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

What Do If the Microphone is not working?

If the Microphone is not working it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

How to Know when the Anker Zolo Liberty Earbuds are fully charged?

Калі навушнікі зараджаюцца, some lights are on. When fully charged, all lights turn off from the charging case.

Заключэнне

We hope after reading this article you will know how to Pair Anker Zolo Liberty Earbuds to your devices.

The pairing process is so simple and easy just follow the above-mentioned steps carefully without skipping any step, otherwise you can not complete the pairing process. Мы спадзяемся, што гэты артыкул вам вельмі дапаможа!