Do you want to Pair Altec Lansing NanoPods Earbuds? The Altec Lansing NanoPods have 4 sati trajanja baterije i 16 sati koristeći futrolu za punjenje. They have Bluetooth 5.0, IPX5 certifikat otpornosti na znoj i prašinu, 50ft of work range, and more. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
How To Pair Altec Lansing NanoPods Earbuds?
If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
Korak 1: Take out the earbuds from the charging case. Nakon toga, they will turn ON automatically, and a light will light up on them.
Korak 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.
Korak 3: Sad, select NanoPods. Ako se od vas zatraži lozinka, tip 0000.
Nakon toga, the pairing process will be done, the earbuds will be paired to your device and ready for use.
How To Pair Altec Lansing NanoPods Earbuds With PC (Windows)
Korak 1: Kao prvo, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
Korak 2: Sad, go to the settings.
Korak 3: Idite na Bluetooth i druge uređaje.
Korak 4: Click on Add device.
Korak 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
Korak 6: Onda, select NanoPods. If needed a password, tip 0000.
After all these steps, the pairing process will be done, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods Slušalice.
Korak 1: Prvo, take out both earbuds from the charging case.
Korak 2: Onda, identify the left and right earbuds.
Korak 3: Choose the ear tips that best fit your ears.
Korak 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, i uvjerite se da je mikrofon usmjeren prema ustima.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
Uključi
Take out the earbuds from the charging case. Nakon toga, you see a light will light up on the earbuds, and they will turn on automatically.
Ugasiti
To turn Off the Earbuds place them into the charging case. They will turn off automatically.
Kako kontrolirati? / How to Operate? – Instructions
NOTE: The multifunction touch sensor is placed on the top part of the earbuds.
- Press and hold the multifunction touch button on the right earbud for about 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Press the multifunction touch button on any of the earbuds one time to answer an incoming call.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Press and hold the multifunction touch button on the left earbud for about 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. Počeće da radi sam.
Kako napuniti slušalice?
Slušalice
To charge the earbuds, place them into the charging case and close the lid properly. The earbuds will start charging automatically.
Charging case
To charge the charging case, connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.
What Do The Lights Mean?
Slušalice
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- A red light turns ON, on the charging case. Kada se slušalice pune.
- A red light turns off on the charging case. When the earbuds are fully charged.
- A blue light flashed three times. When the earbuds are resetting mode.
- A red light turns blue. When the earbuds are reset.
Charging case
- One light flashing while charging is less than 25% of the battery.
- One light on and one flashing while charging is less than 50% of the battery.
- Two lights on and one flashing while charging the case has less than 75% of the battery.
- Three lights on and one flashing while charging is less than 100% of the battery.
- All lights are on while the charging case is fully charged.
How To Reset Altec Lansing NanoPods Earbuds?
Korak 1: Delete all pairing records of the NanoPods from the connected device.
Korak 2: Then take out both earbuds from the case. Nakon toga, automatski će se uključiti.
Korak 3: Sad, press and hold the multifunction touch button on both earbuds for about 9 sekundi. Nakon toga, a blue light will flash three times, to then turn red and back to blue.
Korak 4: Place the earphones back in the charging case. Nakon toga, resetovanje će biti obavljeno.
Savjeti za rješavanje problema
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. Da popravim ovo, možete učiniti sljedeće:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
ako to ne uspije, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. Da popravim ovo, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Try factory resetting the earbuds.
The microphone is not working
If this happens, it can be because the microphone is muted, ili su slušalice loše postavljene. Da popravim ovo, možete učiniti sljedeće:
Check the device microphone volume. ako to ne uspije, that means there might be a defect in the earbuds, pa pokušajte ih zamijeniti ili dobiti povrat novca.
FAQs to Pair Altec Lansing NanoPods Earbuds
Are the Altec Lansing NanoPods waterproof?
br, the Altec Lansing NanoPods are not waterproof (IPX6 and up). Imaju ocjenu IPX5, što znači da su zaštićeni od vode koja izlazi iz mlaznice.
Do the Altec Lansing NanoPods have a microphone?
Da, slušalice dolaze sa integrisanim mikrofonima.
Do the Altec Lansing NanoPods have a low latency/gaming mode?
br, these earbuds don’t have a low latency/gaming mode.
How to know when the Altec Lansing NanoPods are fully charged?
Kada se slušalice pune, some lights turn on the charging case. Kada je potpuno napunjen, all lights turn off.
Can the Altec Lansing NanoPods connect to a PC and Laptop?
Da, these earbuds can connect to PCs, laptopovi, and even tablets.
Are the Altec Lansing NanoPods noise canceling?
br! Ove slušalice ne dolaze sa tehnologijom za poništavanje buke.
Zaključak
We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. Dakle, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. Nadamo se da će vam ovaj članak puno pomoći!
