Gusto ba nimo ipares ang mga ANTEC Lansing Nanopods Earbuds? Ang ALTEC Lansing Nanopods adunay 4 oras sa kinabuhi sa baterya ug 16 mga oras gamit ang charging case. Sila adunay Bluetooth 5.0, ang IPX5 singot ug dust-proof nga sertipikasyon, 50ft of work range, ug uban pa. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
Giunsa ang pagpares sa mga ANTEC Lansing Nanopods Earbuds?
If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
Lakang 1: Kuhaa ang mga earbuds gikan sa kaso sa pag-charge. Human niadto, they will turn ON automatically, and a light will light up on them.
Lakang 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.
Lakang 3: Karon, select NanoPods. Kung giaghat alang sa usa ka password, matang 0000.
Human niadto, Ang proseso sa pagpares himuon, the earbuds will be paired to your device and ready for use.
How To Pair Altec Lansing NanoPods Earbuds With PC (Windows)
Lakang 1: Una sa tanan, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
Lakang 2: Karon, go to the settings.
Lakang 3: Adto sa Bluetooth ug uban pang mga device.
Lakang 4: Pag-klik sa Add Device.
Lakang 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
Lakang 6: Unya, select NanoPods. If needed a password, matang 0000.
After all these steps, Ang proseso sa pagpares himuon, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods Mga earbud.
Lakang 1: Una, take out both earbuds from the charging case.
Lakang 2: Unya, identify the left and right earbuds.
Lakang 3: Choose the ear tips that best fit your ears.
Lakang 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, ug siguroha nga ang mikropono nagpunting sa baba.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
Biko
Kuhaa ang mga earbuds gikan sa kaso sa pag-charge. Human niadto, you see a light will light up on the earbuds, ug sila awtomatikong mobalik.
Motipas
To turn Off the Earbuds place them into the charging case. They will turn off automatically.
Unsaon Pagkontrol? / How to Operate? – Instructions
NOTA: The multifunction touch sensor is placed on the top part of the earbuds.
- Padayon ug hupti ang button sa paghikap sa multifunction sa tuo nga arebud alang sa 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Ipadayon ang button sa paghikap sa multifunction sa bisan unsang bahin sa mga earbuds sa usa ka higayon aron matubag ang usa ka umaabot nga tawag.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Padayon ug hupti ang button sa paghikap sa multifunction sa wala nga earbud alang sa 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. Magsugod kini sa pagtrabaho sa iyang kaugalingon.
How To Charge The Earbuds?
Mga earbud
Sa pag-charge sa mga earbuds, place them into the charging case and close the lid properly. Ang mga earbuds magsugod sa pag-charge awtomatiko.
Kaso sa kaso
Sa pag-charge sa kaso sa pag-charge, connect the case to a USB charger or charging port with the included USB-A to C cable. Magsugod kini sa pag-charge sa Awtomatiko.
What Do The Lights Mean?
Mga earbud
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- A red light turns ON, on the charging case. Sa diha nga ang mga earbud nag-charge.
- A red light turns off on the charging case. When the earbuds are fully charged.
- A blue light flashed three times. When the earbuds are resetting mode.
- A red light turns blue. When the earbuds are reset.
Kaso sa kaso
- One light flashing while charging is less than 25% of the battery.
- One light on and one flashing while charging is less than 50% of the battery.
- Two lights on and one flashing while charging the case has less than 75% of the battery.
- Three lights on and one flashing while charging is less than 100% of the battery.
- All lights are on while the charging case is fully charged.
How To Reset Altec Lansing NanoPods Earbuds?
Lakang 1: Delete all pairing records of the NanoPods from the connected device.
Lakang 2: Then take out both earbuds from the case. Human niadto, sila mo-on awtomatikong.
Lakang 3: Karon, press and hold the multifunction touch button on both earbuds for about 9 segundos. Human niadto, a blue light will flash three times, to then turn red and back to blue.
Lakang 4: Place the earphones back in the charging case. Human niadto, ang pag-reset himuon.
Mga Tip sa Pag-troubleshoot
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. Aron ayuhon kini, mahimo nimo ang mosunod:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
Kung dili kana molihok, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. Aron ayuhon kini, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Try factory resetting the earbuds.
The microphone is not working
If this happens, it can be because the microphone is muted, o ang mga earbud dili maayo nga posisyon. Aron ayuhon kini, mahimo nimo ang mosunod:
Check the device microphone volume. Kung dili kana molihok, that means there might be a defect in the earbuds, busa sulayi ang pag-ilis niini o pagkuha og refund.
FAQs to Pair Altec Lansing NanoPods Earbuds
Are the Altec Lansing NanoPods waterproof?
Dili, the Altec Lansing NanoPods are not waterproof (IPx6 ug pataas). Adunay sila rating nga IPX5, nga nagpasabot nga sila gipanalipdan batok sa pipila ka tubig nga giplanohan gikan sa usa ka nozzle.
Do the Altec Lansing NanoPods have a microphone?
Oo, Ang mga earbuds moabut uban ang mga integrated nga mikropono.
Do the Altec Lansing NanoPods have a low latency/gaming mode?
Dili, Kini nga mga ariyos wala adunay usa ka ubos nga latency / gaming mode.
How to know when the Altec Lansing NanoPods are fully charged?
Sa diha nga ang mga earbud nag-charge, some lights turn on the charging case. Sa dihang fully charged na, all lights turn off.
Can the Altec Lansing NanoPods connect to a PC and Laptop?
Oo, Kini nga mga ariyos mahimong makonekta sa mga PC, laptop, ug bisan ang mga papan.
Are the Altec Lansing NanoPods noise canceling?
Dili! Kini nga mga ariyos dili moabut uban ang teknolohiya nga pagkansela sa pagkansela.
Konklusyon
We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. Busa, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. Kami nanghinaut nga kini nga artikulo makatabang kanimo ug daghan!
