Cómo conectar el Atrix Axe 1250 Auriculares?

¿Te preguntas cómo conectar el Atrix Axe? 1250 auriculares a su dispositivo? Estás en la publicación correcta., aquí te contamos cómo configurar y utilizar el auriculares con diferentes dispositivos como PS5, PS4, Xbox Serie X/S, Xbox uno, ordenador personal, y cambiar.

En esta publicación, Le dimos una guía adecuada sobre cómo conectar el Atrix Axe. 1250 auriculares a diferentes dispositivos. Ahora comencemos con más detalles para conectar el Atrix Axe. 1250 Auriculares!

Hacha Atrix 1250 auriculares

Hacha Atrix 1250 Los auriculares inalámbricos son compatibles de forma inalámbrica con PS4/PS5 y PC. (usando el dongle USB incluido) y con cable compatible con Xbox One, Xbox Serie X/S, y nintendo interruptor (utilizando el cable auxiliar de 3,5 mm incluido).

Descripción del producto

Cómo conectar el Atrix Axe 1250 auriculares

Antes de iniciar el proceso de conexión, debe asegurarse de que tanto el dispositivo como los auriculares estén encendidos. Para conectar el Atrix Axe 1250 auriculares, tienes que seguir estos pasos:

Enciende los auriculares: En primer lugar, asegúrese de que sus auriculares estén completamente cargados. Ahora encienda sus auriculares presionando y manteniendo presionado el botón de encendido durante 3 segundos hasta que vea una luz azul que indica que está encendido.

Activa Bluetooth en tu dispositivo: Habilite Bluetooth en el dispositivo que desea emparejar con sus auriculares. Vaya al menú de configuración y busque la configuración de Bluetooth. Actívalo si aún no está habilitado.

Ponga el auricular en modo de emparejamiento: Put your headset in pairing mode by pressing and holding the pairing button until you see an Indicator Rapidly Flashing Blue.

Scan for devices: On your Bluetooth-enabled device, scan for Atrix AX 1250 headset within the list of available devices.

Select the headset: Once your device finds the Atrix AX 1250 auriculares, select it from the list to initiate the pairing process.

Enter Passcode (si se le solicita): In some cases, you may be prompted to enter a passcode to complete the pairing process. En ese caso, tipo 0000 o 1234.

Confirmation: After entering the passcode (si es requerido), your device should confirm that the pairing process is successful. You may hear a sound cue or see a notification on your device indicating that the pairing is complete.

Cómo configurar con PS4

To set up the Atrix Ax 1250 headset with PS4 follow the below steps

1. Plug the 5.8 GHz receiver into the USB port located on the front of your console.
2. And power on the headset.
3. Enter the settings menu Devices > Dispositivos de audio.
4. Set input and output device to USB headset.
5. Change Audio Output to Headphones to Chat Audio.
6. Set the headphone volume level to your desired setting.
7. Select the microphone level and follow the prompts to adjust your desired settings.

You can also use the included 3.5mm Aux cable to connect by plugging the headset into the controller.

Configurar con PS5

To set up the Atrix Ax 1250 headset with PS5 follow these steps

1. Plug the 5.8 GHz receiver into the USB port located on the front of your console.
2. And power on the headset.
3. Enter the settings menu Devices > Dispositivos de audio.
4. Set input and output device to USB headset.
5. Change Audio Output to Headphones to Chat Audio.
6. Set the headphone volume level to your desired setting.
7. Select the microphone level and follow the prompts to adjust your desired settings.

You can also use the included 3.5mm Aux cable to connect by plugging the headset into the controller.

Configuración con XBOX Serie X/S

To set up the Atrix Ax 1250 headset with XBOX Series X/S

1. Use the AUX cable to plug the headset into the controller.
2. Enter the System Menu > Audio.
3. Set the Headset Volume to your desired setting.
4. Set Mic Monitoring to your desired setting. your desired settings.

Nota: Not all controllers will have a 3.5mm audio jack.

Configuración con XBOX One

To set up the Atrix Ax 1250 headset with XBOX Series X/S

1. Use the AUX cable to plug the headset into the controller.
2. Enter the System Menu > Audio.
3. Set the Headset Volume to your desired setting.
4. Set Mic Monitoring to your desired setting.

Nota: Not all controllers will have a 3.5mm audio jack.

Configuración con PC

To set up the Atrix Ax 1250 headset with PC follow the given below steps

1. Plug the 5.8 GHz receiver into an audio-enabled USB port on your PC and power on the headset.
2. Set audio input and output to USB USB-connected device.
3. If you’re having problems make sure the USB device is selected for default communications in sound control settings.

Cómo ajustar el micrófono

Cómo cargar los auriculares

Plug the USB-C end of the charging cable into the headset. Plug the USB-A end of the charging cable into a UL-compliant power supply of at least DC 5V 800mA. A full charge requires approximately 4 horas. The red light will turn off when charging is complete.

Cómo restablecer el Atrix Axe 1250 auriculares

Delete the headset from your device list of paired devices. Once deleted, power your phone completely off, then power it back on. This resets the Bluetooth stack in the Bluetooth software on the phone.

Repair the headset with your device by following the above instructions without skipping any steps.

Conclusión

Por último, connect the Atrix Ax 1250 headset to your device in the same as other Bluetooth devices. The only difference here is the setup method. Hemos cubierto el proceso de conexión para cada tipo de dispositivo..

Follow them and connect the Atrix Ax 1250 auriculares a su dispositivo. Esperamos que este artículo te ayude mucho.. Entonces, get help from this article and enjoy your favorite playlist by using the Atrix Ax 1250 auriculares!