Comment coupler les écouteurs Altec Lansing NanoPods?

Do you want to Pair Altec Lansing NanoPods Earbuds? The Altec Lansing NanoPods have 4 hours of battery life and 16 heures d'utilisation du boîtier de chargement. They have Bluetooth 5.0, the IPX5 sweat and dust-proof certification, 50ft of work range, et plus. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.

Comment coupler les écouteurs Altec Lansing NanoPods?

If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.

How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?

Étape 1: Retirez les écouteurs de l'étui de chargement. Après cela, they will turn ON automatically, and a light will light up on them.

Étape 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.

Étape 3: À présent, select NanoPods. Si on vous demande un mot de passe, taper 0000.

Après cela, le processus d'appairage sera terminé, the earbuds will be paired to your device and ready for use.

How To Pair Altec Lansing NanoPods Earbuds With PC (les fenêtres)

Étape 1: Tout d'abord, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.

Étape 2: À présent, go to the settings.

Étape 3: Accédez à Bluetooth et autres appareils.

Étape 4: Cliquez sur Ajouter un appareil.

Étape 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.

Étape 6: Alors, select NanoPods. If needed a password, taper 0000.

After all these steps, le processus d'appairage sera terminé, the earbuds pair with your device, and now you can use them.

How To Wear Altec Lansing NanoPods Earbuds?

Here we describe a few steps on how to wear the Altec Lansing NanoPods Écouteurs.

Étape 1: Première, take out both earbuds from the charging case.

Étape 2: Alors, identify the left and right earbuds.

Étape 3: Choose the ear tips that best fit your ears.

Étape 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, et assurez-vous que le microphone pointe vers la bouche.

How To Turn On And Off Altec Lansing NanoPods Earbuds?

Allumer

Retirez les écouteurs de l'étui de chargement. Après cela, you see a light will light up on the earbuds, et ils s'allumeront automatiquement.

Éteindre

To turn Off the Earbuds place them into the charging case. They will turn off automatically.

Comment contrôler? / How to Operate? – Instructions

NOTE: The multifunction touch sensor is placed on the top part of the earbuds.

• Appuyez et maintenez enfoncé le bouton tactile multifonction de l'écouteur droit pendant environ 2 seconds to play or pause music.
• Press the multifunction touch button on the right earbud two times to play the next song.
• Press the multifunction touch button on the left earbud two times to play the previous song.
• Press the multifunction touch button on the right earbud one time to turn the volume up.
• Press the multifunction touch button on the left earbud one time to turn the volume down.
• Appuyez une fois sur le bouton tactile multifonction de l'un des écouteurs pour répondre à un appel entrant.
• Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
• Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
• Appuyez et maintenez enfoncé le bouton tactile multifonction de l'écouteur gauche pendant environ 2 seconds to Activate the voice assistant.

How To Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. Il commencera à fonctionner tout seul.

Comment charger les écouteurs?

Écouteurs

Pour charger les écouteurs, place them into the charging case and close the lid properly. Les écouteurs commenceront à se charger automatiquement.

Étui de chargement

Pour charger le boîtier de chargement, connect the case to a USB charger or charging port with the included USB-A to C cable. Il commencera à se charger automatiquement.

What Do The Lights Mean?

Écouteurs

• A light turns on when you take them out from the charging case. It means the earbuds turn on.
• A red light turns ON, on the charging case. Lorsque les écouteurs sont en charge.
• A red light turns off on the charging case. Lorsque les écouteurs sont complètement chargés.
• A blue light flashed three times. When the earbuds are resetting mode.
• A red light turns blue. When the earbuds are reset.

Étui de chargement

• One light flashing while charging is less than 25% of the battery.
• One light on and one flashing while charging is less than 50% of the battery.
• Two lights on and one flashing while charging the case has less than 75% of the battery.
• Three lights on and one flashing while charging is less than 100% of the battery.
• All lights are on while the charging case is fully charged.

How To Reset Altec Lansing NanoPods Earbuds?

Étape 1: Delete all pairing records of the NanoPods from the connected device.

Étape 2: Then take out both earbuds from the case. Après cela, they will turn on automatically.

Étape 3: À présent, press and hold the multifunction touch button on both earbuds for about 9 secondes. Après cela, a blue light will flash three times, to then turn red and back to blue.

Étape 4: Place the earphones back in the charging case. Après cela, the resetting will be done.

Des conseils de dépannage

Left/Right/One side of the earbuds has stopped working

If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. Pour résoudre ce problème, you can do the following:

1. Charge the earbud that is not working or, place both earbuds in the charging case.

2. Factory reset the earbuds.

3. Check if the earbuds are operating within a normal working range

Si ça ne marche pas, the earbud is probably faulty.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbud is dirty or the volume is set low. Pour résoudre ce problème, you can do the following steps.

1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. Pour résoudre ce problème, you can do the following:

Check the device microphone volume. Si ça ne marche pas, that means there might be a defect in the earbuds, so try replacing them or getting a refund.

FAQs to Pair Altec Lansing NanoPods Earbuds

Are the Altec Lansing NanoPods waterproof?

Non, the Altec Lansing NanoPods are not waterproof (IPX6 et plus). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

Do the Altec Lansing NanoPods have a microphone?

Oui, the earbuds come with integrated microphones.

Do the Altec Lansing NanoPods have a low latency/gaming mode?

Non, ces écouteurs n'ont pas de mode de latence/jeu faible.

How to know when the Altec Lansing NanoPods are fully charged?

Lorsque les écouteurs sont en charge, some lights turn on the charging case. When fully charged, all lights turn off.

Can the Altec Lansing NanoPods connect to a PC and Laptop?

Oui, ces écouteurs peuvent se connecter aux PC, ordinateurs portables, et même des tablettes.

Are the Altec Lansing NanoPods noise canceling?

Non! Ces écouteurs ne sont pas dotés de technologie de suppression du bruit.

Conclusion

We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. Donc, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. Nous espérons que cet article vous aidera beaucoup!