Yadda za a haɗa Enickire E18 FEEBUDS?

You are currently viewing How to Pair Enacfire E18 Earbuds?

Kuna so ku haɗu da peraffire e18 kunnenku tare da na'urarku? Enaka E18 FASAHA Canza Haɗin zuwa 33 Ft Long Kamar yadda na'urarka tana cikin kewayon, Enacfire E18 Bluetooth earbuds guarantee you quality music better than the wire-embedded earphones.

E18 wireless Bluetooth earbuds can last over 4 hours of talking Time and 2.5-3 hours of music playtime on a single charge. While on the go the portable charging case power can last up to 15 hours (recharge up to 4-5 times full charge for the Bluetooth earphones). You can go for a day without power.

But if you do not know how to pair them with your devices. We give you a complete guide to pairing, charging, and how to control them. Don haka, Bari mu fara kuma mu nutse cikin cikakkun bayanai!

How to power Off and On

Power On

1: Power On Manually

To power on the Enacfire E18 Earbuds press and hold the multi-function button for 2 seconds. The LED lights flash for 1 second with the voice prompt power on.

2: Power On Automatically

Take out the Earbuds from the dock, they will automatically power on with the voice prompt power on.

Kashe wuta

1: Power Off Manually

Press the multi-function button for 4 seconds, and the white LED light flashes for 1 na biyu, with the voice prompt powered off.

2: Power Off Automatically

Put the earbuds back into the dock they will automatically power off.

Yadda za a haɗa Enickire E18 FEEBUDS

To pair Enacfire E18 Kunne to your device follow the steps carefully.

  1. Na farko, take out the earbuds from the dock they will automatically on. If they do not power on, power on them by pressing and holding the multi-function button for 2 seconds until the LED lights flash blue.
  2. Sannan, jira 2 seconds for the left and right headset to be connected automatically. The main earbud (the left one) will be on pairing mode with LED light flashing in blue and white alternatively.
  3. Yanzu, on your device go to settings and turn on the Bluetooth.
  4. Bayan 'yan seconds, a list appears on your device, from the list search Enacfire E18 and select it to pair with your device.
  5. If asking for a PIN enter 0000.
  6. Yanzu, your earbuds are connected to your device and ready to use.

How to Control the Earbuds

Calling

Press the multi-function button on any earbuds to answer or end a call.

Double-press the multi-function button to reject a call.

Voice Dialing

Long press the multi-function button (the left one) don domin 1 second to start the voice dial function of the mobile phone. Press the multi-function again for 1 second to exit from the voice dialing mode.

Adjust the Volume and Play Music

  1. Press the multi-function button to play and pause the music.
  2. Double-press the multi-function button to skip the next track.
  3. Press the right earbud to increase the volume.
  4. Press the left earbud to down the volume.

Charging and Battery Indication

Kunne cajin

To charge the earbuds put them in the dock they will automatically start charging. It takes about 1 hour to fully charge, and when the earbuds are fully charged the white LED light will turn off.

Dock Charging

To charge the dock use the 5V 1A adapter to charge, otherwise it may damage the Headset. It takes about 2 Awanni don cikakken caji, and when the dock is fully charged the blue LED light will turn off.

Dock LED Indicator

Dock battery percentage.

  1. 0 - 25% Blue indicator flashes 1 time every 2 seconds.
  2. 25% – 50% Blue indicator flashes 2 times every 2 seconds.
  3. 50% – 75% Blue indicator flashes 3 times every 2 seconds.
  4. 75% – 100% Blue indicator flashes 4 times every 2 seconds, until it the fully Charged, and the blue light flash stops being light on.

Dock Discharging

  1. 0 - 25% blue indicator flashes 1 lokaci.
  2. 25% – 50% blue indicator flashes 2 sau.
  3. 50% – 75% blue indicator flashes 3 sau.
  4. 75% – 100% blue indicator flashes 4 sau.

Muhawara

  1. Bluetooth version: 4.2
  2. Support HFP, Hsp, and AVRCP Bluetooth profiles
  3. Dimension：20 x 16 x14.5mm
  4. Support iPhone/iPad battery indication
  5. Bluetooth normal distance range: 10M
  6. Battery Capacity
  7. Headsets: 50maharancin Mah
  8. Dock: 500maharancin Mah
  9. Talk/Music time: 2.5-3Ha h
  10. Standby time: 240Ha h
  11. Support Voice Prompt

Kammalawa

We hope after reading this article you will be able to pair Enacfire E18 Earbuds with your desired device, how to use. How to charge it, how to control it, and its specifications. Don haka, all you need to know is how to pair Enacfire E18 Earbuds. Muna fatan wannan labarin zai taimaka muku abubuwa da yawa game da wannan samfurin!

Bar Amsa