Do you want to Pair Altec Lansing NanoPods Earbuds? The Altec Lansing NanoPods have 4 hours of battery life and 16 jam menggunakan wadah pengisi daya. They have Bluetooth 5.0, sertifikasi IPX5 tahan keringat dan debu, 50ft of work range, dan banyak lagi. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
Cara Memasangkan Earbud NanoPods Altec Lansing?
If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
Melangkah 1: Keluarkan earbud dari wadah pengisi daya. Setelah itu, they will turn ON automatically, and a light will light up on them.
Melangkah 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.
Melangkah 3: Sekarang, select NanoPods. Jika diminta kata sandi, jenis 0000.
Setelah itu, the pairing process will be done, the earbuds will be paired to your device and ready for use.
How To Pair Altec Lansing NanoPods Earbuds With PC (jendela)
Melangkah 1: Pertama, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
Melangkah 2: Sekarang, go to the settings.
Melangkah 3: Buka Bluetooth dan perangkat lain.
Melangkah 4: Klik Tambahkan perangkat.
Melangkah 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
Melangkah 6: Kemudian, select NanoPods. If needed a password, jenis 0000.
After all these steps, the pairing process will be done, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods earbud.
Melangkah 1: Pertama, take out both earbuds from the charging case.
Melangkah 2: Kemudian, identify the left and right earbuds.
Melangkah 3: Choose the ear tips that best fit your ears.
Melangkah 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, dan pastikan mikrofon mengarah ke mulut.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
Menyalakan
Keluarkan earbud dari wadah pengisi daya. Setelah itu, you see a light will light up on the earbuds, and they will turn on automatically.
Matikan
To turn Off the Earbuds place them into the charging case. They will turn off automatically.
Bagaimana Mengontrol? / How to Operate? – Instructions
CATATAN: The multifunction touch sensor is placed on the top part of the earbuds.
- Press and hold the multifunction touch button on the right earbud for about 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Press the multifunction touch button on any of the earbuds one time to answer an incoming call.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Press and hold the multifunction touch button on the left earbud for about 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. It will start working by itself.
Cara Mengisi Daya Earbud?
earbud
Untuk mengisi daya earbud, place them into the charging case and close the lid properly. Earbud akan mulai mengisi daya secara otomatis.
Charging case
Untuk mengisi daya wadah pengisi daya, connect the case to a USB charger or charging port with the included USB-A to C cable. Ini akan mulai mengisi daya secara otomatis.
What Do The Lights Mean?
earbud
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- A red light turns ON, on the charging case. Saat earbud sedang diisi dayanya.
- A red light turns off on the charging case. Saat earbud terisi penuh.
- A blue light flashed three times. When the earbuds are resetting mode.
- A red light turns blue. When the earbuds are reset.
Charging case
- One light flashing while charging is less than 25% of the battery.
- One light on and one flashing while charging is less than 50% of the battery.
- Two lights on and one flashing while charging the case has less than 75% of the battery.
- Three lights on and one flashing while charging is less than 100% of the battery.
- All lights are on while the charging case is fully charged.
How To Reset Altec Lansing NanoPods Earbuds?
Melangkah 1: Delete all pairing records of the NanoPods from the connected device.
Melangkah 2: Then take out both earbuds from the case. Setelah itu, mereka akan menyala secara otomatis.
Melangkah 3: Sekarang, press and hold the multifunction touch button on both earbuds for about 9 detik. Setelah itu, a blue light will flash three times, to then turn red and back to blue.
Melangkah 4: Place the earphones back in the charging case. Setelah itu, pengaturan ulang akan dilakukan.
Tip Mengatasi Masalah
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. Untuk memperbaikinya, Anda dapat melakukan hal berikut:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
Jika itu tidak berhasil, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. Untuk memperbaikinya, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Coba atur ulang earbud ke setelan pabrik.
The microphone is not working
If this happens, it can be because the microphone is muted, atau posisi earbud salah. Untuk memperbaikinya, Anda dapat melakukan hal berikut:
Check the device microphone volume. Jika itu tidak berhasil, that means there might be a defect in the earbuds, jadi coba ganti atau dapatkan pengembalian dana.
FAQs to Pair Altec Lansing NanoPods Earbuds
Are the Altec Lansing NanoPods waterproof?
TIDAK, the Altec Lansing NanoPods are not waterproof (IPX6 dan lebih tinggi). Mereka memiliki peringkat IPX5, yang berarti mereka terlindung dari air yang keluar dari nosel.
Do the Altec Lansing NanoPods have a microphone?
Ya, the earbuds come with integrated microphones.
Do the Altec Lansing NanoPods have a low latency/gaming mode?
TIDAK, earbud ini tidak memiliki latensi rendah/mode permainan.
How to know when the Altec Lansing NanoPods are fully charged?
Saat earbud sedang diisi dayanya, some lights turn on the charging case. Saat terisi penuh, all lights turn off.
Can the Altec Lansing NanoPods connect to a PC and Laptop?
Ya, earbud ini dapat terhubung ke PC, laptop, dan bahkan tablet.
Are the Altec Lansing NanoPods noise canceling?
TIDAK! Headphone ini tidak dilengkapi dengan teknologi peredam bising.
Kesimpulan
We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. Jadi, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. Kami harap artikel ini akan banyak membantu Anda!
