Do you want to pair Tozo A1 Earbuds? Tozo A1 Earbuds have the IPX5 certification, Bluetooth 5.3, Ndụ batrị nke 6 awa + 24 using the charging case and a 6mm speaker.
If you have a new pair of Tozo A1 Earbuds and want to pair them to your devices. Pairing them to your devices is a simple process, to do this completely read this article and follow the pairing process. Ya mere, ka anyị malite!
Otu esi ejikọta eriri ntị Tozo A1?
Take out the earbuds from the case and they will automatically be in pairing mode and pair with each other in 10 sekọnd. One of the earbuds flashes red and blue alternately. Ugbu a, search for the pairing name Tozo A1.
How to Pair Tozo A1 Earbuds to IOS and Android Phones?
- Wepụ ntị na ntị site na ikpe chaja, na ntị ga-agbanye na akpaghị aka.
- After that when a blue and red light starts flashing in one of the earbuds, they will be ready to pair with any device.
- Mgbe ahụ, turn on the Bluetooth on the desired device.
- Go to the Bluetooth settings on your device.
- Ugbu a, select Tozo A1.
- If prompted for a password type 0000.
- Mgbe nke ahụ mechara, a blue light will start flashing every 3 sekọnd, A ga-eme ya.
Pair Tozo A1 Earbuds with a PC (Windows)
- Gbanye Bluetooth window.
- Gaa na ntọala.
- Go to Bluetooth and other devices and click on Add device.
- Pịa na Bluetooth.
- Open the charging case and take the earbuds out. Mgbe nke ahụ mechara, Earbuds ga-agbanye na akpaghị aka.
- Mgbe ahụ, select Tozo A1 If a password is needed, ụdị 0000.
- Mgbe nke ahụ mechara, a blue light will start flashing every 3 sekọnd, A ga-eme ya.
How to Wear Tozo A1 Earbuds
Take both earbuds out of the charging case. Chọpụta aka ekpe na aka nri. Họrọ ndụmọdụ ntị nke kacha dabara na ntị gị. Then insert the headphones into the inner canal of the ears. Bugharia maka nkasi obi kachasị mma na nke kachasị mma, ma hụ na igwe okwu na-atụ aka n'ọnụ.
How to Turn On and Off
Gbanwuo
Na-akpaghị aka
Open the charging case and take the earbuds out. Mgbe nke ahụ mechara, Earbuds ga-agbanye na akpaghị aka.
Iji aka
You can press and hold the multifunction touch button on both earbuds for about 3 seconds to turn them on.
Gbanyụọ
Na-akpaghị aka
Debe ntị na ntị n'ịnyịnya na-akwụ ụgwọ ma mechie mkpuchi ya. Mgbe nke ahụ mechara, Earbuds ga-agbanye onwe gị na akpaghị aka.
Iji aka
You can press and hold the multifunction touch button on both earbuds for about 5 seconds to turn them off.
Touch Button
- A na-etinye bọtịnụ mmetụ aka na akụkụ dị elu nke anụ ahụ.
- Press the multifunction touch button on any of the earbuds 1 time to play or pause the music.
- Press and hold the multifunction touch button on the right earbud to turn the volume up.
- Press and hold the multifunction touch button on the left earbud to turn the volume down.
- Press the multifunction touch button on any of the earbuds 3 times to play the next song.
- Press the multifunction touch button on any of the earbuds 4 times to play the previous song.
- Press the multifunction touch button on any of the earbuds 1 time to answer an incoming call.
- Press the multifunction touch button on any of the earbuds 1 time to end a call.
- Pịa ma jide bọtịnụ mmetụ ọtụtụ ọrụ na ntị ntị ọ bụla maka 2 sekọnd ịjụ oku mbata.
- Press the multifunction touch button on any of the earbuds 3 times to activate the voice assistant.
Otu esi eme ka ọnọdụ Mono rụọ ọrụ?
To activate the mono mode in the Tozo A1, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. Ọ ga-amalite ịrụ ọrụ n'onwe ya.
How to Reset the Tozo A1 Earbuds?
Delete all Tozo A1 pairing records on the connected device. Turn off the Bluetooth function on the device. Were akwụkwọ ntị abụọ na-akwụ ụgwọ. Press the multifunction touch button on both earbuds 5 ugboro, until a red light flashes for 1 nke abụọ.
Place the earbuds into the charging case. Mgbe nke ahụ mechara, A ga-eme nrụpụta ahụ.
How to Charge the Earbuds and Charging Case?
Ihe ntị ntị
Ịchaji ekwe ntị, place them into the charging case and close the lid. Igwe ntị ga-amalite chajị na-akpaghị aka.
Nchaji ikpe
Iji kwụọ ụgwọ nchaji, all you have to do is connect the case to a USB charger or charging port with the included USB-A to C cable.
Mmechi
After reading this article you will be able to pair Tozo A1 earbuds to your devices. Pairing process is an easy process. To do this follow the pairing instruction. Anyị na-atụ anya na akụkọ a ga-enyere gị aka nke ukwuu!
