How to pair Anker Zolo Liberty Earbuds?

How to Pair Anker Zolo Liberty Earbuds? Līdz Anker Zolo Liberty Earbuds come with a battery life of about 8 stundas + up to 100 stundas, izmantojot uzlādes lietu, Bluetooth 4.2, two 5.5mm graphene dynamic drivers, support for the AAC and SBC audio codecs, IPX5 sviedru un putekļu necaurlaidīga sertifikācija, un daudz vairāk.

Pairing Anker Zolo Liberty Austiņas to various devices is easy, but most people don’t know how to Pair Anker Zolo Liberty Earbuds. Don’t worry after reading this article you will be able to Pair Anker Zolo Liberty Earbuds to your devices. Sāksim!

How do you Pair Anker Zolo Liberty Earbuds?

Pairing Anker Zolo Liberty Earbuds is a simple and easy process.

1. Please take out the earbuds from the case, they will automatically turn on and in pairing mode. Arī, you can press and hold the multifunction button for about 1 sekunde.
2. Tad, go to settings and turn on the Bluetooth on your device.
3. Select Zolo Liberty Earbuds from the list on your device and tap on it to pair.
4. If prompted a Password Enter 0000.

How Do You Pair Anker Zolo Liberty Earbuds to IOS and Android Devices?

1. Pirmkārt, Atveriet uzlādes lietu un izņemiet austiņas. Pēc tam, viņi ieslēgs automātiski. If does not turn on automatically, you can press and hold the multifunction touch button on both earbuds for about 1 sekunde.
2. Tad, turn on Bluetooth on your device.
3. Go to the device’s Bluetooth settings.
4. Select Zolo Liberty. Ja nepieciešama parole, ierakstīt 0000. Pēc tam, Pāris tiks veikts.

How Do You Pair Anker Zolo Liberty Earbuds with a PC?

4. Tagad, Atveriet uzlādes lietu un izņemiet austiņas. Pēc tam, viņi ieslēgs automātiski. Arī, you can press and hold the multifunction touch button on both earbuds for about 1 sekunde.

5. Select Zolo Liberty. Ja nepieciešama parole, ierakstīt 0000. Pēc tam, Pāris tiks veikts.

How to Wear Zolo Liberty Earbuds?

Take both earbuds out of the charging case. Identificējiet kreiso un labo austiņas. Izvēlieties ausu galus, kas vislabāk atbilst jūsu ausīm. Ievietojiet austiņas ausu iekšējā kanālā. Rotate for the best possible comfort and best fit, un pārliecinieties, ka mikrofons ir vērsts uz muti.

How to Reset the Zolo Liberty Earbuds?

Izņemiet austiņas no uzlādes gadījuma. Nospiediet un turiet daudzfunkcionālu skārienputnu pogu abās austiņās 5 sekundes, or until a red light starts flashing on the earbuds.

Nospiediet un turiet daudzfunkcionālu skārienputnu pogu abās austiņās 8 seconds or until a pink light starts flashing on the earbuds. Ievietojiet abas austiņas uzlādes gadījumā.

The right earbud will automatically re-pair to the left earbud. Delete all Zolo Liberty pairing information from the connected device. Pēc tam, Atiestatīšana tiks veikta.

Kā kontrolēt?

1. To play or pause a song press the multifunction touch button on any of the earbuds 1 laiks.
2. Play the next song press and hold the multifunction touch button on the right earbud for about 1 sekunde.
3. Play the next previous press and hold the multifunction touch button on the left earbud for about 1 sekunde.
4. Answer an incoming call by pressing the multifunction touch button on any of the earbuds 1 laiks.
5. End a current call press the multifunction touch button on any of the earbuds 1 laiks.
6. Noraidiet ienākošo zvanu nospiediet un turiet daudzfunkciju skārienputnu pogu uz jebkuru no austiņām 1 sekunde.
7. Transfer a call from the earbuds to the connected device press and hold the multifunction touch button on any of the earbuds for about 1 sekunde.
8. Switch between a held call and an active call press and hold the multifunction touch button on any of the earbuds for about 1 sekunde.
9. To activate the voice assistant press the multifunction touch button on any of the earbuds 2 reizes.

FAQS to Pair Anker Zolo Liberty Earbuds?

Are Anker Zolo Liberty Earbuds waterproof?

Nē, the Anker Zolo Liberty is not waterproof. Viņiem ir IPX5 vērtējums, kas nozīmē, ka viņi ir aizsargāti pret kādu ūdeni, kas projicēts no sprauslas.

What Do If the Microphone is not working?

If the Microphone is not working it can be because the microphone is muted, vai austiņas ir slikti novietotas. Lai to labotu, jūs varat darīt šādus

If the microphone is muted, Pārbaudiet ierīces mikrofona skaļumu. Ja tas nedarbojas, that means that there might be a defect in the earbuds, Tāpēc mēģiniet tos aizstāt vai saņemt atmaksu.

How to Know when the Anker Zolo Liberty Earbuds are fully charged?

Kad austiņas tiek uzlādētas, some lights are on. Kad tas ir pilnībā uzlādēts, all lights turn off from the charging case.

Secinājums

We hope after reading this article you will know how to Pair Anker Zolo Liberty Earbuds to your devices.

The pairing process is so simple and easy just follow the above-mentioned steps carefully without skipping any step, otherwise you can not complete the pairing process. Mēs ceram, ka šis raksts jums daudz palīdzēs!