Та Nanopods Earbuds Lannec Lansing LandeC-ийг хослуулахыг хүсч байна уу?? Наноподинг Ланк 4 батерейны цаг ба 16 цэнэглэх хэргийг ашиглан цаг. Блютүүт байна 5.0, the IPX5 sweat and dust-proof certification, 50ft of work range, болон бусад. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
Altec Lansing NanoPods чихэвчийг хэрхэн хослуулах вэ?
If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
Алхам 1: Цэнэглэх хэргээс Earbuds-ийг гаргаж ав. Үүний дараа, they will turn ON automatically, and a light will light up on them.
Алхам 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.
Алхам 3: Одоо, select NanoPods. Нууц үг асуух бол, маяг 0000.
Үүний дараа, Хослуулах үйл явцыг хийх болно, the earbuds will be paired to your device and ready for use.
How To Pair Altec Lansing NanoPods Earbuds With PC (Windows)
Алхам 1: Юуны өмнө, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
Алхам 2: Одоо, go to the settings.
Алхам 3: Блютүүт болон бусад төхөөрөмж дээр очно уу.
Алхам 4: Нэмэх төхөөрөмж дээр дарна уу.
Алхам 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
Алхам 6: Дараа нь, select NanoPods. If needed a password, маяг 0000.
After all these steps, Хослуулах үйл явцыг хийх болно, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods Давхар өвс.
Алхам 1: Эхлээд, take out both earbuds from the charging case.
Алхам 2: Дараа нь, identify the left and right earbuds.
Алхам 3: Choose the ear tips that best fit your ears.
Алхам 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, микрофон аманд чиглүүлж байгаа эсэхийг шалгаарай.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
Асаах
Цэнэглэх хэргээс Earbuds-ийг гаргаж ав. Үүний дараа, you see a light will light up on the earbuds, and they will turn on automatically.
Хаах
To turn Off the Earbuds place them into the charging case. They will turn off automatically.
How to Control? / How to Operate? – Instructions
Мөнгөн дэвсгэрт: The multifunction touch sensor is placed on the top part of the earbuds.
- Press and hold the multifunction touch button on the right earbud for about 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Press the multifunction touch button on any of the earbuds one time to answer an incoming call.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Press and hold the multifunction touch button on the left earbud for about 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. Энэ нь өөрөө ажиллаж эхлэх болно.
Earbuds хэрхэн цэнэглэх вэ?
Давхар өвс
Earbuds цэнэглэх, place them into the charging case and close the lid properly. Earbuds нь автоматаар цэнэглэж эхлэх болно.
Цэнэглэхийн хэрэг
Цэнэглэх хэргийг цэнэглэх, connect the case to a USB charger or charging port with the included USB-A to C cable. Энэ нь автоматаар цэнэглэж эхлэх болно.
What Do The Lights Mean?
Давхар өвс
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- A red light turns ON, on the charging case. Earbuds цэнэглэж байх үед.
- A red light turns off on the charging case. Earbuds бүрэн цэнэглэгдэх үед.
- A blue light flashed three times. When the earbuds are resetting mode.
- A red light turns blue. When the earbuds are reset.
Цэнэглэхийн хэрэг
- One light flashing while charging is less than 25% of the battery.
- One light on and one flashing while charging is less than 50% of the battery.
- Two lights on and one flashing while charging the case has less than 75% of the battery.
- Three lights on and one flashing while charging is less than 100% of the battery.
- All lights are on while the charging case is fully charged.
How To Reset Altec Lansing NanoPods Earbuds?
Алхам 1: Delete all pairing records of the NanoPods from the connected device.
Алхам 2: Then take out both earbuds from the case. Үүний дараа, they will turn on automatically.
Алхам 3: Одоо, press and hold the multifunction touch button on both earbuds for about 9 секунд. Үүний дараа, a blue light will flash three times, to then turn red and back to blue.
Алхам 4: Place the earphones back in the charging case. Үүний дараа, Дахин тохируулах ажлыг хийх болно.
Алдаа засах зөвлөмж
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
If that doesn’t work, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. To fix this, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Try factory resetting the earbuds.
The microphone is not working
If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:
Check the device microphone volume. If that doesn’t work, that means there might be a defect in the earbuds, so try replacing them or getting a refund.
FAQs to Pair Altec Lansing NanoPods Earbuds
Are the Altec Lansing NanoPods waterproof?
-Гүй / -битгий, the Altec Lansing NanoPods are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.
Do the Altec Lansing NanoPods have a microphone?
Тиймээ, the earbuds come with integrated microphones.
Do the Altec Lansing NanoPods have a low latency/gaming mode?
-Гүй / -битгий, these earbuds don’t have a low latency/gaming mode.
How to know when the Altec Lansing NanoPods are fully charged?
Earbuds цэнэглэж байх үед, some lights turn on the charging case. When fully charged, all lights turn off.
Can the Altec Lansing NanoPods connect to a PC and Laptop?
Тиймээ, these earbuds can connect to PCs, зөөврийн компьютер, and even tablets.
Are the Altec Lansing NanoPods noise canceling?
-Гүй / -битгий! These earbuds don’t come with noise-cancellation technology.
Дүгнэлт
We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. Тэгэхээр, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. Энэ нийтлэл танд маш их тусална гэж найдаж байна!
