How to Pair Anker Zolo Liberty Earbuds? Il- Anker Zolo Liberty Earbuds come with a battery life of about 8 sigħat + up to 100 hours using the charging case, Bluetooth 4.2, two 5.5mm graphene dynamic drivers, support for the AAC and SBC audio codecs, the IPX5 sweat and dust-proof certification, and much more.
Pairing Anker Zolo Liberty Earbuds to various devices is easy, but most people don’t know how to Pair Anker Zolo Liberty Earbuds. Don’t worry after reading this article you will be able to Pair Anker Zolo Liberty Earbuds to your devices. Let’s get started!
How do you Pair Anker Zolo Liberty Earbuds?
Pairing Anker Zolo Liberty Earbuds is a simple and easy process.
- Please take out the earbuds from the case, they will automatically turn on and in pairing mode. Ukoll, you can press and hold the multifunction button for about 1 second.
- Imbagħad, go to settings and turn on the Bluetooth on your device.
- Select Zolo Liberty Earbuds from the list on your device and tap on it to pair.
- If prompted a Password Enter 0000.
How Do You Pair Anker Zolo Liberty Earbuds to IOS and Android Devices?
- L-ewwel, open the charging case and take the earbuds out. Wara, they will turn on automatically. If does not turn on automatically, you can press and hold the multifunction touch button on both earbuds for about 1 second.
- Imbagħad, turn on Bluetooth on your device.
- Go to the device’s Bluetooth settings.
- Select Zolo Liberty. If a password is needed, tip 0000. Wara, the pairing will be done.
How Do You Pair Anker Zolo Liberty Earbuds with a PC?
- Turn on Bluetooth on your PC.
- Go to the settings.
- Go to Bluetooth and other devices.
4. Issa, open the charging case and take the earbuds out. Wara, they will turn on automatically. Ukoll, you can press and hold the multifunction touch button on both earbuds for about 1 second.
5. Select Zolo Liberty. If a password is needed, tip 0000. Wara, the pairing will be done.
How to Wear Zolo Liberty Earbuds?
Take both earbuds out of the charging case. Identify the left and right earbuds. Choose the ear tips that best suit your ears. Insert the earbuds into the inner canal of the ears. Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.
How to Reset the Zolo Liberty Earbuds?
Take the earbuds out of the charging case. Press and hold the multifunction touch button on both earbuds for about 5 sekondi, or until a red light starts flashing on the earbuds.
Press and hold the multifunction touch button on both earbuds for about 8 seconds or until a pink light starts flashing on the earbuds. Place both earbuds into the charging case.
The right earbud will automatically re-pair to the left earbud. Delete all Zolo Liberty pairing information from the connected device. Wara, the resetting will be done.
How to Control?
- To play or pause a song press the multifunction touch button on any of the earbuds 1 time.
- Play the next song press and hold the multifunction touch button on the right earbud for about 1 second.
- Play the next previous press and hold the multifunction touch button on the left earbud for about 1 second.
- Answer an incoming call by pressing the multifunction touch button on any of the earbuds 1 time.
- End a current call press the multifunction touch button on any of the earbuds 1 time.
- Reject an incoming call press and hold the multifunction touch button on any of the earbuds for about 1 second.
- Transfer a call from the earbuds to the connected device press and hold the multifunction touch button on any of the earbuds for about 1 second.
- Switch between a held call and an active call press and hold the multifunction touch button on any of the earbuds for about 1 second.
- To activate the voice assistant press the multifunction touch button on any of the earbuds 2 times.
FAQS to Pair Anker Zolo Liberty Earbuds?
Are Anker Zolo Liberty Earbuds waterproof?
Nru, the Anker Zolo Liberty is not waterproof. They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.
What Do If the Microphone is not working?
If the Microphone is not working it can be because the microphone is muted, or the earbuds are badly positioned. Biex tiffissa dan, you can do the following
If the microphone is muted, check the device microphone volume. Jekk dan ma jaħdimx, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.
How to Know when the Anker Zolo Liberty Earbuds are fully charged?
When the earbuds are charging, some lights are on. When fully charged, all lights turn off from the charging case.
Konklużjoni
We hope after reading this article you will know how to Pair Anker Zolo Liberty Earbuds to your devices.
The pairing process is so simple and easy just follow the above-mentioned steps carefully without skipping any step, otherwise you can not complete the pairing process. Nittamaw li dan l-artikolu jgħinek ħafna!
