Momwe Mungavale Anker Zolo Malire a khutu?

Momwe Mungavale Anker Zolo Malire a khutu? The Anker Zolo Liberty Earbuds come with a battery life of about 8 maola + mpaka 100 maola ogwiritsa ntchito mlandu, bulutufi 4.2, two 5.5mm graphene dynamic drivers, support for the AAC and SBC audio codecs, the IPX5 sweat and dust-proof certification, ndi zina zambiri.

Pairing Anker Zolo Liberty Khutu to various devices is easy, but most people don’t know how to Pair Anker Zolo Liberty Earbuds. Don’t worry after reading this article you will be able to Pair Anker Zolo Liberty Earbuds to your devices. Tiyeni tiyambe!

How do you Pair Anker Zolo Liberty Earbuds?

Pairing Anker Zolo Liberty Earbuds is a simple and easy process.

1. Please take out the earbuds from the case, they will automatically turn on and in pairing mode. Komanso, you can press and hold the multifunction button for about 1 wachiwiri.
2. Ndiye, go to settings and turn on the Bluetooth on your device.
3. Select Zolo Liberty Earbuds from the list on your device and tap on it to pair.
4. If prompted a Password Enter 0000.

How Do You Pair Anker Zolo Liberty Earbuds to IOS and Android Devices?

1. Choyamba, tsegulani mlandu wolipirira ndikutulutsa khutu. Pambuyo pake, they will turn on automatically. If does not turn on automatically, you can press and hold the multifunction touch button on both earbuds for about 1 wachiwiri.
2. Ndiye, turn on Bluetooth on your device.
3. Go to the device’s Bluetooth settings.
4. Select Zolo Liberty. Ngati mawu achinsinsi amafunikira, mtundu 0000. Pambuyo pake, the pairing will be done.

How Do You Pair Anker Zolo Liberty Earbuds with a PC?

4. Tsopano, tsegulani mlandu wolipirira ndikutulutsa khutu. Pambuyo pake, they will turn on automatically. Komanso, you can press and hold the multifunction touch button on both earbuds for about 1 wachiwiri.

5. Select Zolo Liberty. Ngati mawu achinsinsi amafunikira, mtundu 0000. Pambuyo pake, the pairing will be done.

How to Wear Zolo Liberty Earbuds?

Tengani khutu zonse chifukwa cha mlandu wolipira. Identify the left and right earbuds. Sankhani Malangizo a khutu lomwe limakhala ndi makutu anu. Ikani khutu m'ngalawa yamkati yama makutu. Rotate for the best possible comfort and best fit, ndipo onetsetsani kuti maikolofoni ikuloza pakamwa.

How to Reset the Zolo Liberty Earbuds?

Tengani khutu kuchokera pa mlandu. Press and hold the multifunction touch button on both earbuds for about 5 masekondi, or until a red light starts flashing on the earbuds.

Press and hold the multifunction touch button on both earbuds for about 8 seconds or until a pink light starts flashing on the earbuds. Place both earbuds into the charging case.

The right earbud will automatically re-pair to the left earbud. Delete all Zolo Liberty pairing information from the connected device. Pambuyo pake, the resetting will be done.

How to Control?

1. To play or pause a song press the multifunction touch button on any of the earbuds 1 nthawi.
2. Play the next song press and hold the multifunction touch button on the right earbud for about 1 wachiwiri.
3. Play the next previous press and hold the multifunction touch button on the left earbud for about 1 wachiwiri.
4. Answer an incoming call by pressing the multifunction touch button on any of the earbuds 1 nthawi.
5. End a current call press the multifunction touch button on any of the earbuds 1 nthawi.
6. Reject an incoming call press and hold the multifunction touch button on any of the earbuds for about 1 wachiwiri.
7. Transfer a call from the earbuds to the connected device press and hold the multifunction touch button on any of the earbuds for about 1 wachiwiri.
8. Switch between a held call and an active call press and hold the multifunction touch button on any of the earbuds for about 1 wachiwiri.
9. To activate the voice assistant press the multifunction touch button on any of the earbuds 2 mafunde.

FAQS to Pair Anker Zolo Liberty Earbuds?

Are Anker Zolo Liberty Earbuds waterproof?

Ayi, the Anker Zolo Liberty is not waterproof. They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

What Do If the Microphone is not working?

If the Microphone is not working it can be because the microphone is muted, or the earbuds are badly positioned. Kukonza izi, you can do the following

If the microphone is muted, Onani kuchuluka kwa maikolofoni. Ngati izo sizigwira ntchito, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

How to Know when the Anker Zolo Liberty Earbuds are fully charged?

Zomwe khutu likulipiritsa, some lights are on. When fully charged, all lights turn off from the charging case.

Mapeto

We hope after reading this article you will know how to Pair Anker Zolo Liberty Earbuds to your devices.

The pairing process is so simple and easy just follow the above-mentioned steps carefully without skipping any step, otherwise you can not complete the pairing process. Tikukhulupirira kuti nkhaniyi ikuthandizani kwambiri!