Do you want to Pair Skullcandy Dime Wireless Earbuds to your device? Skullcadny Dime Wireless Earbuds will be great use while gaming or studying in front of Your PC.
If you don’t know how to pair them to your device don’t worry in this post we teach you to Pair Skullcandy Dime Wireless Earbuds do twojego urządzenia. Follow the below steps carefully to par them. Zacznijmy.
Enter your Earbuds in Pairing Mode
Before connecting the earbuds to any device put them in pairing mode. To put them in pairing mode follow the steps.
- Pierwszy, ensure your earbuds are off and in the charging case. And they are fully charged.
- Następnie, remove the earbuds from the charging case and press and hold the power button for 6 seconds until the LED lights on both earbuds start flashing rapidly.
- After this release the button and wait for the earbuds to enter the pairing mode, the LED lights continuously flash rapidly, showing that the earbuds are entered in the pairing mode.
Pair Skullcandy Dime Wireless Earbuds
To pair Skullcandy Dime Wireless Earbuds to your device follow the given below steps carefully.
Unboxing
Take the earbuds from the charging case and remove the stickers from the charging contact point. Put them again in the charging case for about 30 seconds before first use.
Be sure that the LEDs on the earbuds are red this indicates the charging. Once charged, remove the earbuds from the charging case and put them into the pairing mode.
Pairing
- To pair Skullcandy Dime Wireless Earbuds for the first time, be sure that the earbuds are in the case and fully charged.
- Make sure both earbud’s LEDs are red.
- Both earbuds will then automatically power on and the LEDs will simultaneously flash blue while they sync each other.
- Once the earbuds are have synced together, you will hear a voice prompt that says pairing. Only the left earbud will begin to flash red and blue.
- Teraz, from your device turn on Bluetooth and look for Dime in your available list of Bluetooth devices.
- Select Dime and accept any pair or ok prompts that appear on your screen.
- When pairing is complete you hear a voice Connected.
Pair Skullcandy Dime Wireless Earbuds with a New Device
- To pair Sckullcandy Dime Wireless Earbuds with a new device, remove your earbuds from the case.
- Następnie, press and hold the button on both earbuds for 4 seconds to power them off.
- Następnie, press and hold the button on either earbud for 4 seconds to enter pairing mode.
- A voice prompt will say pairing and you can then select Dime from your Bluetooth device list.
Turning Skullcadny Dime Wireless Earbuds On And Off
- Your earbuds will automatically turn on when you take them out of the case.
- They will turn off when you put them back in the case.
- If you want to turn off your earbuds outside press the button on each earbud for 4 sekundy, and to turn them on back press the button for 2 sekundy.
How to Control the Buds
Skullcandy Dime Wireless Earbuds have a full suite of controls on each earbud to keep you connected without having a touch your phone.
- To play or pause the music press on either earbud once.
- To turn up the volume press the button on the right earbud twice.
- To turn down the volume press the button on the left earbud twice.
- To skip a song forward press and hold the button on the right earbud for one second.
- To skip a song backward press and hold the button on the left earbud for one second.
- To take a call press the button on either earbud once.
- To end a call press the button on either earbud once.
- To rejact a call press and hold the button on either earbud for 1 second.
- To activate the assistant on your device press the button on either earbud 3 czasy.
How to Charge
To charge the earbuds place them in the case, the earbuds LEDs will be solid red while charging. The LEDs will turn off when fully charged.
To charge the case plug in the Micro USB charger cable and connect it to a computer. When the charging is full the LED will turn solid green.
Solo Mode
- Sometimes you want to be able to hear your music, but still hear what’s going on around you.
- When you want to do that you can use just one earbud.
- Once you pair your earbuds, you can remove either earbud from the case and it connects in solo mode.
How to Reset the Skullcandy Dime Earbuds
- Pierwszy, remove your earbuds from the Bluetooth-paired list on your device and turn Bluetooth off.
- Następny, take your earbuds out of the charging case and allow them to power on.
- Now that your earbuds are powered on and not connected to any device, press and hold the button on either earbud 2 czasy, then hold for two seconds, this will reset your earbuds.
- You will see the LEDs on both earbuds flash blue as they sync to gather and pair them to your device by following the above pairing steps.
Wniosek
If you want to pair Skullcandy Dime Wireless Earbuds with your devices, you can do this easily. Just follow the above-mentioned steps carefully without skipping any step. Więc, that’s all you need to know how Pair Skullcandy Dime Wireless Earbuds with your device, Mamy nadzieję, że ten artykuł bardzo Ci w tym pomoże.
