Do you want to Pair Altec Lansing NanoPods Earbuds? The Altec Lansing NanoPods have 4 часов автономной работы и 16 часов с использованием зарядного чехла. They have Bluetooth 5.0, Сертификация IPX5 пота и пыль, 50ft of work range, и более. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
Как подключить наушники Altec Lansing NanoPods?
If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
Шаг 1: Уберите наушники из случая зарядки. После этого, they will turn ON automatically, and a light will light up on them.
Шаг 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.
Шаг 3: Сейчас, select NanoPods. Если будет предложено ввести пароль, тип 0000.
После этого, the pairing process will be done, the earbuds will be paired to your device and ready for use.
How To Pair Altec Lansing NanoPods Earbuds With PC (Окна)
Шаг 1: Прежде всего, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
Шаг 2: Сейчас, go to the settings.
Шаг 3: Перейти к Bluetooth и другим устройствам.
Шаг 4: Click on Add device.
Шаг 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
Шаг 6: Затем, select NanoPods. If needed a password, тип 0000.
After all these steps, the pairing process will be done, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods Наушники.
Шаг 1: Первый, take out both earbuds from the charging case.
Шаг 2: Затем, identify the left and right earbuds.
Шаг 3: Choose the ear tips that best fit your ears.
Шаг 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, и убедитесь, что микрофон указывает на рот.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
Включать
Уберите наушники из случая зарядки. После этого, you see a light will light up on the earbuds, and they will turn on automatically.
Выключать
To turn Off the Earbuds place them into the charging case. Они отключатся автоматически.
Как контролировать? / How to Operate? – Instructions
ПРИМЕЧАНИЕ: The multifunction touch sensor is placed on the top part of the earbuds.
- Press and hold the multifunction touch button on the right earbud for about 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Press the multifunction touch button on any of the earbuds one time to answer an incoming call.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Press and hold the multifunction touch button on the left earbud for about 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. Он начнет работать само по себе.
How To Charge The Earbuds?
Наушники
Зарядка наушников, place them into the charging case and close the lid properly. Наушники начнут заряжаться автоматически..
Charging case
Зарядка зарядного чехла, connect the case to a USB charger or charging port with the included USB-A to C cable. Он начнет заряжаться автоматически.
What Do The Lights Mean?
Наушники
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- A red light turns ON, on the charging case. Когда наушники заряжаются.
- A red light turns off on the charging case. Когда наушники полностью заряжены.
- A blue light flashed three times. When the earbuds are resetting mode.
- A red light turns blue. When the earbuds are reset.
Charging case
- One light flashing while charging is less than 25% of the battery.
- One light on and one flashing while charging is less than 50% of the battery.
- Two lights on and one flashing while charging the case has less than 75% of the battery.
- Three lights on and one flashing while charging is less than 100% of the battery.
- All lights are on while the charging case is fully charged.
How To Reset Altec Lansing NanoPods Earbuds?
Шаг 1: Delete all pairing records of the NanoPods from the connected device.
Шаг 2: Then take out both earbuds from the case. После этого, Они будут включать автоматически.
Шаг 3: Сейчас, press and hold the multifunction touch button on both earbuds for about 9 секунды. После этого, a blue light will flash three times, to then turn red and back to blue.
Шаг 4: Place the earphones back in the charging case. После этого, Сброс будет сделан.
Советы по устранению неполадок
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. Чтобы это исправить, Вы можете сделать следующее:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
Если это не сработает, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. Чтобы это исправить, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Попробуйте сбросить настройки наушников до заводских настроек..
The microphone is not working
If this happens, it can be because the microphone is muted, или наушники плохо расположены. Чтобы это исправить, Вы можете сделать следующее:
Check the device microphone volume. Если это не сработает, that means there might be a defect in the earbuds, Так что попробуйте заменить их или получить возмещение.
FAQs to Pair Altec Lansing NanoPods Earbuds
Are the Altec Lansing NanoPods waterproof?
Нет, the Altec Lansing NanoPods are not waterproof (IPX6 and up). У них есть рейтинг IPX5, Это означает, что они защищены от какой -то воды, спроектированной из сопла.
Do the Altec Lansing NanoPods have a microphone?
Да, Наушники поставляются с интегрированными микрофонами.
Do the Altec Lansing NanoPods have a low latency/gaming mode?
Нет, these earbuds don’t have a low latency/gaming mode.
How to know when the Altec Lansing NanoPods are fully charged?
Когда наушники заряжаются, some lights turn on the charging case. Когда полностью заряжен, all lights turn off.
Can the Altec Lansing NanoPods connect to a PC and Laptop?
Да, these earbuds can connect to PCs, ноутбуки, and even tablets.
Are the Altec Lansing NanoPods noise canceling?
Нет! Эти наушники не поставляются с технологией шумоподавления.
Вывод
We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. Так, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. Мы надеемся, что эта статья вам очень поможет!
