Do you want to Pair JBL Endurance Peak II Earbuds ඔබගේ උපාංග වෙත? The JBL Endurance Peak II Earbuds have 6 hours of battery life and 2 hours of charging time, බ්ලූටූත් 5.0 සමග 10 meters of working range, a 10mm dynamic driver, support for the A2DP 1.3, AVRCP 1.5, and HFP 1.7 profiles, the amazing IPX7 water-proof certification.
But if you don’t know how to Pair JBL Endurance Peak 2 Earbuds to your devices, don’t fret in this post we will give you a complete instruction to Pair JBL Endurance Peak II Earbuds with different devices.
How to Pair JBL Endurance Peak II Earbuds
Below we describe easy steps to Pair JBL Endurance Peak 2 Earbuds to different devices. Let’s get started.
Pair JBL Endurance Peak II Earbuds with IOS and Android devices
You can pair JBL Endurance Peak II Earbuds with IOS and Android devices by helping these steps.
- සියල්ලට කළින්, ආරෝපණ පෙට්ටිය විවෘත කර ඉයර්බඩ් පිටතට ගන්න. එයට පසු, a blue light will start flashing, and the earbuds will turn on automatically.
- දැන්, turn on Bluetooth on your device.
- Go to the device’s Bluetooth settings.
- Select JBL Endurance Peak II. මුරපදයක් ඉල්ලා සිටියහොත්, වර්ගය 0000. එයට පසු, a blue light will start flashing, and the pairing will be done.
Pair JBL Endurance Peak II Earbuds with PC
- පලමු, turn on Bluetooth on your PC by going to Settings > Devices > බ්ලූටූත් & Other Devices.
- ඉන්පසු, ආරෝපණ පෙට්ටිය විවෘත කර ඉයර්බඩ් පිටතට ගන්න. එයට පසු, a blue light will start flashing, and the earbuds will turn on automatically.
- දැන්, select JBL Endurance Peak II. If a password is needed, වර්ගය 0000.
- එයට පසු, a blue light will start flashing, and the pairing will be done.
How to Wear JBL Endurance Peak II Earbuds
Take both earbuds out of the charging case. Identify the left and right earbuds.
ඔබේ කන්වලට වඩාත් ගැලපෙන කන් ඉඟි තෝරන්න. දැන්, insert the headphones into the inner canal of the ears. Rotate for the best possible comfort and best fit, සහ මයික්‍රෆෝනය මුඛය දෙසට යොමු වන බවට වග බලා ගන්න.
How to Turn On and Off JBL Endurance II Earbuds?
Turn on
To turn on open the lid of the charging case and take the earbuds out. එයට පසු, a blue light will start flashing, and the earbuds will turn on automatically.
Turn off
To turn off place the earbuds into the charging case and close its lid. එයට පසු, the earbuds will turn off automatically.
How to control
- Play or pause a songpress the touch panel on the right earbud one time.
- Turn the volume up, slide up the touch panel on the right earbud.
- Turn the volume down, slide down the touch panel on the right earbud.
- Play the next song, press the touch panel on the left earbud one time.
- Play the previous song,press the touch panel on the left earbud two times.
- Answer an incoming call, press the touch panel on any of the earbuds one time.
- End a current call, press the touch panel on any of the earbuds one time.
- Reject an incoming call, press the touch panel on any of the earbuds two times.
- Mute or unmute the microphone, press and hold the touch panel on any of the earbuds for 2 තත්පර.
- Activate the voice assistant, press the touch panel on the right earbud one time.
මොනෝ මාදිලිය සක්රිය කරන්නේ කෙසේද
To activate the mono mode in JBL Endurance Peak II earbuds, you have to pair the earbuds to your device and take out one of the earbuds that you want to use from the charging case. එය තනිවම වැඩ කිරීමට පටන් ගනී.
How to Reset the JBL Endurance Peak II Earbuds
- Delete all JBL Endurance Peak II pairing records on the connected device. Place both earbuds into the charging case.
- Press and hold the touch panel on both earbuds for 20 තත්පර, or until a red light turns on.
- Wait until it turns off. එයට පසු, the resetting will be done.
- දැන්, again pair them with your device.
FAQS to Pair JBL Endurance Peak II Earbuds
Is the JBL Endurance Peak II waterproof?
ඔව්, the JBL Endurance Peak II is waterproof. They have a rating of IPX7, which means that they not only are against water but are also protected against the effects of immersion.
Does the JBL Endurance Peak II have a microphone?
ඔව්, the earbuds come with integrated microphones.
Are the JBL Endurance Peak II noise-canceling?
නැත. These earbuds don’t come with noise-cancellation technology.
How do we know when the JBL Endurance Peak II is fully charged?
When the earbuds are charging, a light is on. When they are fully charged, the light turns off.
නිගමනය
We hope after reading this article you will be able to pair them to your desired device, ඒවා අඳින්නේ කොහොමද කියලා, how to activate Mono Mode, and how to reset them. We hope this article will help you a lot about this product!
