How to Pair JBL Endurance Peak II Earbuds?

Do you want to Pair JBL Endurance Peak II Earbuds to your devices? The JBL Endurance Peak II Earbuds have 6 hours of battery life and 2 hours of charging time, Bluetooth 5.0 with 10 meters of working range, a 10mm dynamic driver, support for the A2DP 1.3, AVRCP 1.5, and HFP 1.7 profiles, the amazing IPX7 water-proof certification.

But if you don’t know how to Pair JBL Endurance Peak 2 Earbuds to your devices, don’t fret in this post we will give you a complete instruction to Pair JBL Endurance Peak II Earbuds with different devices.

How to Pair JBL Endurance Peak II Earbuds

Below we describe easy steps to Pair JBL Endurance Peak 2 Earbuds to different devices. Let’s get started.

Pair JBL Endurance Peak II Earbuds with IOS and Android devices

You can pair JBL Endurance Peak II Earbuds with IOS and Android devices by helping these steps.

1. Marka hore, open the charging case and take the earbuds out. Intaa ka dib, a blue light will start flashing, and the earbuds will turn on automatically.
2. Hadda, turn on Bluetooth on your device.
3. Go to the device’s Bluetooth settings.
4. Select JBL Endurance Peak II. If prompted for a password, nooca 0000. Intaa ka dib, a blue light will start flashing, and the pairing will be done.

Pair JBL Endurance Peak II Earbuds with PC

1. Marka hore, turn on Bluetooth on your PC by going to Settings > Devices > Bluetooth & Other Devices.
2. Markaa, open the charging case and take the earbuds out. Intaa ka dib, a blue light will start flashing, and the earbuds will turn on automatically.
3. Hadda, select JBL Endurance Peak II. If a password is needed, nooca 0000.
4. Intaa ka dib, a blue light will start flashing, and the pairing will be done.

How to Wear JBL Endurance Peak II Earbuds

Take both earbuds out of the charging case. Identify the left and right earbuds.

Choose the ear tips that best suit your ears. Hadda, insert the headphones into the inner canal of the ears. Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off JBL Endurance II Earbuds?

Turn on

To turn on open the lid of the charging case and take the earbuds out. Intaa ka dib, a blue light will start flashing, and the earbuds will turn on automatically.

Turn off

To turn off place the earbuds into the charging case and close its lid. Intaa ka dib, the earbuds will turn off automatically.

How to control

1. Play or pause a songpress the touch panel on the right earbud one time.
2. Turn the volume up, slide up the touch panel on the right earbud.
3. Turn the volume down, slide down the touch panel on the right earbud.
4. Play the next song, press the touch panel on the left earbud one time.
5. Play the previous song,press the touch panel on the left earbud two times.
6. Answer an incoming call, press the touch panel on any of the earbuds one time.
7. End a current call, press the touch panel on any of the earbuds one time.
8. Reject an incoming call, press the touch panel on any of the earbuds two times.
9. Mute or unmute the microphone, press and hold the touch panel on any of the earbuds for 2 ilbiriqsi.
10. Activate the voice assistant, press the touch panel on the right earbud one time.

How to Activate the Mono Mode

To activate the mono mode in JBL Endurance Peak II earbuds, you have to pair the earbuds to your device and take out one of the earbuds that you want to use from the charging case. It will start working by itself.

How to Reset the JBL Endurance Peak II Earbuds

1. Delete all JBL Endurance Peak II pairing records on the connected device. Place both earbuds into the charging case.
2. Press and hold the touch panel on both earbuds for 20 ilbiriqsi, or until a red light turns on.
3. Wait until it turns off. Intaa ka dib, the resetting will be done.
4. Hadda, again pair them with your device.

FAQS to Pair JBL Endurance Peak II Earbuds

Is the JBL Endurance Peak II waterproof?

Haa, the JBL Endurance Peak II is waterproof. They have a rating of IPX7, which means that they not only are against water but are also protected against the effects of immersion.

Does the JBL Endurance Peak II have a microphone?

Haa, the earbuds come with integrated microphones.

Are the JBL Endurance Peak II noise-canceling?

Maya. These earbuds don’t come with noise-cancellation technology.

How do we know when the JBL Endurance Peak II is fully charged?

When the earbuds are charging, a light is on. When they are fully charged, the light turns off.

Gabagabo

We hope after reading this article you will be able to pair them to your desired device, how to wear them, how to activate Mono Mode, and how to reset them. We hope this article will help you a lot about this product!