Na u batla ho ipata ka li-lanning tsa Nanopods? Altec e lalding Nanopods 4 lihora tsa bophelo ba betri le 16 lihora tse sebelisang mokotla oa ho tjhaja. Ba na le Bluetooth 5.0, IPX5 Swat le Setifikeiti sa Leruo, 50ft of work range, le ho feta. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
Mokhoa oa ho lula altec Lansuding li-Atbuds tsa Nanopods?
If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
Mohato 1: Ntša li-earbuds mokotleng oa ho tjhaja. Ka mor'a moo, they will turn ON automatically, and a light will light up on them.
Mohato 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.
Mohato 3: Jwale, select NanoPods. Haeba e khothalletsoa phasewete, mofuta 0000.
Ka mor'a moo, Ts'ebetso ea ho nka karolo e tla etsoa, the earbuds will be paired to your device and ready for use.
How To Pair Altec Lansing NanoPods Earbuds With PC (Windows)
Mohato 1: Ntlha ea pele, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
Mohato 2: Jwale, go to the settings.
Mohato 3: Eya ho Bluetooth le lisebelisoa tse ling.
Mohato 4: Tobetsa ho sesebelisoa.
Mohato 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
Mohato 6: Joale, select NanoPods. If needed a password, mofuta 0000.
After all these steps, Ts'ebetso ea ho nka karolo e tla etsoa, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods Li-earbuds.
Mohato 1: Ea pele, take out both earbuds from the charging case.
Mohato 2: Joale, identify the left and right earbuds.
Mohato 3: Choose the ear tips that best fit your ears.
Mohato 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, 'me u netefatse hore microphone e supa molomong.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
Bulela
Ntša li-earbuds mokotleng oa ho tjhaja. Ka mor'a moo, you see a light will light up on the earbuds, mme ba tla ikhula ka boeona.
Koala
To turn Off the Earbuds place them into the charging case. Ba tla tima ka bohona.
Mokhoa oa ho Tsamaisa? / How to Operate? – Instructions
HLOKOMELA: The multifunction touch sensor is placed on the top part of the earbuds.
- Tobetsa le ho ts'oara konopo ea Ciroporcont ea ho ama ka ho le letona la tsebe e nepahetseng 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Tobetsa konopo ea COSTifunction Inthaneteng ho ea la tsebeng e le 'ngoe ho araba mohala o kenang.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Tobetsa le ho ts'oara konopo ea Ciroporcont e nang le tsebe e ka letsohong le letšehali 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. E tla qala ho sebetsa ka boeona.
Tsela ea ho Lahla Litsete?
Li-earbuds
Ho lefisa tsebe, place them into the charging case and close the lid properly. Litsela li tla qala ho lefisa ka bo eona.
Nyeoe ea ho tjhaja
Ho lefisa nyeoe ea ho tjhaja, connect the case to a USB charger or charging port with the included USB-A to C cable. E tla qala ho lefisa ka boeona.
What Do The Lights Mean?
Li-earbuds
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- A red light turns ON, on the charging case. Ha baahloli ba ntse ba lefella.
- A red light turns off on the charging case. Ha bana ba qosoa ka botlalo.
- A blue light flashed three times. When the earbuds are resetting mode.
- A red light turns blue. When the earbuds are reset.
Nyeoe ea ho tjhaja
- One light flashing while charging is less than 25% of the battery.
- One light on and one flashing while charging is less than 50% of the battery.
- Two lights on and one flashing while charging the case has less than 75% of the battery.
- Three lights on and one flashing while charging is less than 100% of the battery.
- All lights are on while the charging case is fully charged.
How To Reset Altec Lansing NanoPods Earbuds?
Mohato 1: Delete all pairing records of the NanoPods from the connected device.
Mohato 2: Then take out both earbuds from the case. Ka mor'a moo, ba tla fetoha ka boeona.
Mohato 3: Jwale, press and hold the multifunction touch button on both earbuds for about 9 metsotsoana. Ka mor'a moo, a blue light will flash three times, to then turn red and back to blue.
Mohato 4: Place the earphones back in the charging case. Ka mor'a moo, Setete se tla etsoa.
Malebela a thulanang
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. Ho lokisa sena, o ka etsa tse latelang:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
Haeba seo ha se sebetse, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. Ho lokisa sena, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Leka fektheri e khutlisa li-uarbuds.
The microphone is not working
If this happens, it can be because the microphone is muted, kapa litsebi tsa bana li behiloe hampe. Ho lokisa sena, o ka etsa tse latelang:
Check the device microphone volume. Haeba seo ha se sebetse, that means there might be a defect in the earbuds, Kahoo, leka ho ba khutlisa kapa ho fumana puseletso.
FAQs to Pair Altec Lansing NanoPods Earbuds
Are the Altec Lansing NanoPods waterproof?
Che, the Altec Lansing NanoPods are not waterproof (Ipx6 le holimo). Ba na le litekanyetso tsa ipx5, ho bolelang hore ba sirelelitsoe ka lebaka la metsi a itseng a khethiloe ke nozzle.
Do the Altec Lansing NanoPods have a microphone?
Ee, Liaparo li tla ka li-microphone tse kopaneng.
Do the Altec Lansing NanoPods have a low latency/gaming mode?
Che, Litsebi tsena ha li na mokhoa o tlase oa ho beoa.
How to know when the Altec Lansing NanoPods are fully charged?
Ha baahloli ba ntse ba lefella, some lights turn on the charging case. Ha e lefisoa ka botlalo, all lights turn off.
Can the Altec Lansing NanoPods connect to a PC and Laptop?
Ee, Litsebi tsena li ka hokela li-PC, Laptops, esita le matlapa.
Are the Altec Lansing NanoPods noise canceling?
Che! Liithuti tsena ha li tle ka theknoloji ea ho hlakoloa lerata.
Qetello
We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. Kahoo, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. Re tšepa hore sehlooho sena se tla u thusa haholo!
