Do you want to Pair Altec Lansing NanoPods Earbuds? The Altec Lansing NanoPods have 4 hours of battery life and 16 hours using the charging case. They have Bluetooth 5.0, the IPX5 sweat and dust-proof certification, 50ft of work range, and more. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
How To Pair Altec Lansing NanoPods Earbuds?
If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
Step 1: Take out the earbuds from the charging case. Баъд аз он, they will turn ON automatically, and a light will light up on them.
Step 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.
Step 3: Ҳозир, select NanoPods. If prompted for a password, type 0000.
Баъд аз он, the pairing process will be done, the earbuds will be paired to your device and ready for use.
How To Pair Altec Lansing NanoPods Earbuds With PC (Windows)
Step 1: Дар ҷои аввал, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
Step 2: Ҳозир, go to the settings.
Step 3: Go to Bluetooth and other devices.
Step 4: Click on Add device.
Step 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
Step 6: Баъд, select NanoPods. If needed a password, type 0000.
After all these steps, the pairing process will be done, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods Earbuds.
Step 1: Аввал, take out both earbuds from the charging case.
Step 2: Баъд, identify the left and right earbuds.
Step 3: Choose the ear tips that best fit your ears.
Step 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
Turn on
Take out the earbuds from the charging case. Баъд аз он, you see a light will light up on the earbuds, and they will turn on automatically.
Turn off
To turn Off the Earbuds place them into the charging case. They will turn off automatically.
How to Control? / How to Operate? – Instructions
NOTE: The multifunction touch sensor is placed on the top part of the earbuds.
- Press and hold the multifunction touch button on the right earbud for about 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Press the multifunction touch button on any of the earbuds one time to answer an incoming call.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Press and hold the multifunction touch button on the left earbud for about 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. It will start working by itself.
How To Charge The Earbuds?
Earbuds
To charge the earbuds, place them into the charging case and close the lid properly. The earbuds will start charging automatically.
Charging case
To charge the charging case, connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.
What Do The Lights Mean?
Earbuds
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- A red light turns ON, on the charging case. When the earbuds are charging.
- A red light turns off on the charging case. When the earbuds are fully charged.
- A blue light flashed three times. When the earbuds are resetting mode.
- A red light turns blue. When the earbuds are reset.
Charging case
- One light flashing while charging is less than 25% of the battery.
- One light on and one flashing while charging is less than 50% of the battery.
- Two lights on and one flashing while charging the case has less than 75% of the battery.
- Three lights on and one flashing while charging is less than 100% of the battery.
- All lights are on while the charging case is fully charged.
How To Reset Altec Lansing NanoPods Earbuds?
Step 1: Delete all pairing records of the NanoPods from the connected device.
Step 2: Then take out both earbuds from the case. Баъд аз он, they will turn on automatically.
Step 3: Ҳозир, press and hold the multifunction touch button on both earbuds for about 9 seconds. Баъд аз он, a blue light will flash three times, to then turn red and back to blue.
Step 4: Place the earphones back in the charging case. Баъд аз он, the resetting will be done.
Troubleshooting Tips
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
If that doesn’t work, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. To fix this, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Try factory resetting the earbuds.
The microphone is not working
If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:
Check the device microphone volume. If that doesn’t work, that means there might be a defect in the earbuds, so try replacing them or getting a refund.
FAQs to Pair Altec Lansing NanoPods Earbuds
Are the Altec Lansing NanoPods waterproof?
No, the Altec Lansing NanoPods are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.
Do the Altec Lansing NanoPods have a microphone?
Бале, the earbuds come with integrated microphones.
Do the Altec Lansing NanoPods have a low latency/gaming mode?
No, these earbuds don’t have a low latency/gaming mode.
How to know when the Altec Lansing NanoPods are fully charged?
When the earbuds are charging, some lights turn on the charging case. When fully charged, all lights turn off.
Can the Altec Lansing NanoPods connect to a PC and Laptop?
Бале, these earbuds can connect to PCs, ноутбукхо, and even tablets.
Are the Altec Lansing NanoPods noise canceling?
No! These earbuds don’t come with noise-cancellation technology.
Хулоса
We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. Пас, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. We hope this article will help you a lot!
