Do you want to Pair Altec Lansing NanoPods Earbuds? The Altec Lansing NanoPods have 4 ชั่วโมงการใช้งานแบตเตอรี่และ 16 hours using the charging case. They have Bluetooth 5.0, the IPX5 sweat and dust-proof certification, 50ft of work range, และอื่น ๆ. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
How To Pair Altec Lansing NanoPods Earbuds?
If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
ขั้นตอน 1: Take out the earbuds from the charging case. หลังจากนั้น, they will turn ON automatically, and a light will light up on them.
ขั้นตอน 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.
ขั้นตอน 3: ตอนนี้, select NanoPods. หากได้รับแจ้งให้ใส่รหัสผ่าน, พิมพ์ 0000.
หลังจากนั้น, the pairing process will be done, the earbuds will be paired to your device and ready for use.
How To Pair Altec Lansing NanoPods Earbuds With PC (Windows)
ขั้นตอน 1: ก่อนอื่นเลย, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
ขั้นตอน 2: ตอนนี้, go to the settings.
ขั้นตอน 3: Go to Bluetooth and other devices.
ขั้นตอน 4: Click on Add device.
ขั้นตอน 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
ขั้นตอน 6: แล้ว, select NanoPods. If needed a password, พิมพ์ 0000.
After all these steps, the pairing process will be done, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods Earbuds.
ขั้นตอน 1: อันดับแรก, take out both earbuds from the charging case.
ขั้นตอน 2: แล้ว, identify the left and right earbuds.
ขั้นตอน 3: Choose the ear tips that best fit your ears.
ขั้นตอน 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, และตรวจสอบให้แน่ใจว่าไมโครโฟนชี้ไปที่ปาก.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
เปิด
Take out the earbuds from the charging case. หลังจากนั้น, you see a light will light up on the earbuds, and they will turn on automatically.
ปิด
To turn Off the Earbuds place them into the charging case. They will turn off automatically.
How to Control? / How to Operate? – Instructions
NOTE: The multifunction touch sensor is placed on the top part of the earbuds.
- Press and hold the multifunction touch button on the right earbud for about 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Press the multifunction touch button on any of the earbuds one time to answer an incoming call.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Press and hold the multifunction touch button on the left earbud for about 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. มันจะเริ่มทำงานเอง.
How To Charge The Earbuds?
Earbuds
To charge the earbuds, place them into the charging case and close the lid properly. The earbuds will start charging automatically.
Charging case
To charge the charging case, connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.
What Do The Lights Mean?
Earbuds
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- A red light turns ON, on the charging case. เมื่อหูฟังเอียร์บัดกำลังชาร์จ.
- A red light turns off on the charging case. When the earbuds are fully charged.
- A blue light flashed three times. When the earbuds are resetting mode.
- A red light turns blue. When the earbuds are reset.
Charging case
- One light flashing while charging is less than 25% of the battery.
- One light on and one flashing while charging is less than 50% of the battery.
- Two lights on and one flashing while charging the case has less than 75% of the battery.
- Three lights on and one flashing while charging is less than 100% of the battery.
- All lights are on while the charging case is fully charged.
How To Reset Altec Lansing NanoPods Earbuds?
ขั้นตอน 1: Delete all pairing records of the NanoPods from the connected device.
ขั้นตอน 2: Then take out both earbuds from the case. หลังจากนั้น, they will turn on automatically.
ขั้นตอน 3: ตอนนี้, press and hold the multifunction touch button on both earbuds for about 9 วินาที. หลังจากนั้น, a blue light will flash three times, to then turn red and back to blue.
ขั้นตอน 4: Place the earphones back in the charging case. หลังจากนั้น, การรีเซ็ตจะเสร็จสิ้น.
เคล็ดลับการแก้ไขปัญหา
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
If that doesn’t work, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. To fix this, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Try factory resetting the earbuds.
The microphone is not working
If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:
Check the device microphone volume. If that doesn’t work, that means there might be a defect in the earbuds, so try replacing them or getting a refund.
FAQs to Pair Altec Lansing NanoPods Earbuds
Are the Altec Lansing NanoPods waterproof?
เลขที่, the Altec Lansing NanoPods are not waterproof (IPX6 and up). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.
Do the Altec Lansing NanoPods have a microphone?
ใช่, เอียร์บัดมาพร้อมกับไมโครโฟนในตัว.
Do the Altec Lansing NanoPods have a low latency/gaming mode?
เลขที่, these earbuds don’t have a low latency/gaming mode.
How to know when the Altec Lansing NanoPods are fully charged?
เมื่อหูฟังเอียร์บัดกำลังชาร์จ, some lights turn on the charging case. When fully charged, all lights turn off.
Can the Altec Lansing NanoPods connect to a PC and Laptop?
ใช่, these earbuds can connect to PCs, แล็ปท็อป, and even tablets.
Are the Altec Lansing NanoPods noise canceling?
เลขที่! เอียร์บัดเหล่านี้ไม่ได้มาพร้อมกับเทคโนโลยีตัดเสียงรบกวน.
บทสรุป
We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. ดังนั้น, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. เราหวังว่าบทความนี้จะช่วยคุณได้มาก!
