Eşleştirmek ister misin JBL Endurance Peak II Earbuds cihazlarınıza? The JBL Endurance Peak II Earbuds have 6 hours of battery life and 2 hours of charging time, Bluetooth 5.0 with 10 meters of working range, a 10mm dynamic driver, support for the A2DP 1.3, AVRCP 1.5, and HFP 1.7 profiles, the amazing IPX7 water-proof certification.
But if you don’t know how to Pair JBL Endurance Peak 2 Cihazlarınıza kulaklıklar, don’t fret in this post we will give you a complete instruction to Pair JBL Endurance Peak II Earbuds with different devices.
JBL Dayanıklılık Peak II kulaklıklar nasıl eşleştirilir
Below we describe easy steps to Pair JBL Endurance Peak 2 Earbuds to different devices. Let’s get started.
Pair JBL Endurance Peak II Earbuds with IOS and Android devices
You can pair JBL Endurance Peak II Earbuds with IOS and Android devices by helping these steps.
- Öncelikle, Şarj çantasını açın ve kulaklıkları çıkarın. daha sonrasında, a blue light will start flashing, and the earbuds will turn on automatically.
- Şimdi, turn on Bluetooth on your device.
- Cihazın Bluetooth ayarlarına gidin.
- Select JBL Endurance Peak II. Bir şifre istenirse, tip 0000. daha sonrasında, a blue light will start flashing, Ve eşleştirme yapılacak.
Pair JBL Endurance Peak II Earbuds with PC
- Birinci, turn on Bluetooth on your PC by going to Settings > Cihazlar > Bluetooth & Diğer cihazlar.
- Daha sonra, Şarj çantasını açın ve kulaklıkları çıkarın. daha sonrasında, a blue light will start flashing, and the earbuds will turn on automatically.
- Şimdi, select JBL Endurance Peak II. If a password is needed, tip 0000.
- daha sonrasında, a blue light will start flashing, Ve eşleştirme yapılacak.
How to Wear JBL Endurance Peak II Earbuds
Her iki kulaklık da şarj çantasından çıkarın. Sol ve sağ kulaklıkları tanımlayın.
Kulaklarınıza en uygun kulak uçlarını seçin. Şimdi, insert the headphones into the inner canal of the ears. Mümkün olan en iyi konfor ve en iyi uyum için döndürün, ve mikrofonun ağzına işaret ettiğinden emin olun.
How to Turn On and Off JBL Endurance II Earbuds?
Açılmak
To turn on open the lid of the charging case and take the earbuds out. daha sonrasında, a blue light will start flashing, and the earbuds will turn on automatically.
Kapamak
To turn off place the earbuds into the charging case and close its lid. daha sonrasında, kulaklıklar otomatik olarak kapanacak.
How to control
- Play or pause a songpress the touch panel on the right earbud one time.
- Turn the volume up, slide up the touch panel on the right earbud.
- Turn the volume down, slide down the touch panel on the right earbud.
- Play the next song, press the touch panel on the left earbud one time.
- Play the previous song,press the touch panel on the left earbud two times.
- Answer an incoming call, press the touch panel on any of the earbuds one time.
- End a current call, press the touch panel on any of the earbuds one time.
- Reject an incoming call, press the touch panel on any of the earbuds two times.
- Mute or unmute the microphone, press and hold the touch panel on any of the earbuds for 2 saniye.
- Activate the voice assistant, press the touch panel on the right earbud one time.
Mono modu nasıl etkinleştirilir
To activate the mono mode in JBL Endurance Peak II earbuds, you have to pair the earbuds to your device and take out one of the earbuds that you want to use from the charging case. Kendi başına çalışmaya başlayacak.
How to Reset the JBL Endurance Peak II Earbuds
- Delete all JBL Endurance Peak II pairing records on the connected device. Her iki kulaklığı da şarj kutusuna yerleştirin.
- Press and hold the touch panel on both earbuds for 20 saniye, or until a red light turns on.
- Wait until it turns off. daha sonrasında, the resetting will be done.
- Şimdi, again pair them with your device.
FAQS to Pair JBL Endurance Peak II Earbuds
Is the JBL Endurance Peak II waterproof?
Evet, the JBL Endurance Peak II is waterproof. IPX7 derecesi var, yani sadece suya karşı değil, aynı zamanda daldırmanın etkilerine karşı korunurlar.
Does the JBL Endurance Peak II have a microphone?
Evet, the earbuds come with integrated microphones.
Are the JBL Endurance Peak II noise-canceling?
HAYIR. Bu kulaklıklar gürültü-korelasyon teknolojisi ile gelmiyor.
How do we know when the JBL Endurance Peak II is fully charged?
Kulaklıklar şarj olurken, a light is on. When they are fully charged, the light turns off.
Çözüm
We hope after reading this article you will be able to pair them to your desired device, Onları nasıl giyerim, how to activate Mono Mode, and how to reset them. We hope this article will help you a lot about this product!
