Do you want to Straighten the Headphone wires? Because you’ve been wearing your headphones a lot lately and the cord is in a weird curly shape, making it shorter than usual. But as you try to straighten the wire, it pulls itself back to the twisty mess you found it in. Vì thế, don’t worry in this article we discuss how to Straighten the Headphone Wires and keep it that way. Let’s dive right in.
How Do You Straighten the Headphone Wires?
Two things usually cause unstraight headphone wires.
1: Twists 2: Tangles
Wire twists happen as a result of natural daily use. As you spin or rotate your headphones, the wire also rotates, which builds tension. The wire will then collapse to relieve that tension, resulting in curls, bends, and other deformities.
Mặt khác, your headphone wires may look deformed or curled when you just got them untangled or if they have been coiled too tightly.
Tuy nhiên, in this case, there are a few methods you can try to straighten out your headphones’ wire. Let’s go through each of them!
Method 1: Run your Fingers Across the Twisted Wire
The common way to quickly fix a twisted headphone wire is by using your fingers, how you can do it follow the below steps
- đầu tiên, grab the wire between your thumb and index finger.
- Hiện nay, keeping a mildly firm grip, slowly and thoroughly pass the wire through your fingers, moving from the base of your headphones to the end where the jack is.
- Sau đó, repeat this process 2-3 times.
Method 2: Hang your Headphones Freely
The next method is hanging your headphones freely.
- Đầu tiên, hold the plug end of your headphones’ cable.
- And, let the other end of the cable hang freely in the air.
- Sau đó, wait for your headphones to start spinning, or use your hands to create momentum.
- Once the spinning slows down, run your fingers along the cable to untwist.
Method 3: Set the Headphones’ Wire Straight Using a Weight
This method works best after you’ve initially un-twisted and straightened your headphones’ wire as much as possible but still notice some curling or deformation.
In that case, you can use a slightly heavy object to get your headphones’ wire back to its original shape. How to do it, here are some steps.
- Hang your headphones from a higher point, like a banister, coat hanger, doorknob, or towel rail.
- Hiện nay, attach a slightly heavy object near the plug using adhesive tape, a binder clip, or a piece of rope.
- Sau đó, leave your headphones hanging with the weight for 24-48 hours to see the results.
Ghi chú: Keep in mind that the keyword here is slightly weighted. You’re also working with gravity, so use just enough weight to avoid pulling down the cable with too much force which depends on the thickness and sturdiness of your headphones’ cable.
Method 4: Lay the Headphones’ Wire on a Flat Surface
If you don’t have a place to hang your headphones you can straighten out your headphones’ wire on a flat surface like a table or the floor.
- Lay your headphones on a flat surface and keep the wire straight as possible.
- Đặt một cuốn sách hoặc vật nặng nhẹ lên đầu dây điện.
- Đợi khoảng 48 giờ, và bạn có được một sợi dây thẳng hoàn toàn.
How to Prevent Wire from Twisting and Curling?
Những chỗ xoắn không được xử lý ngay lập tức có thể gây ra những điều không mong muốn xảy ra với dây của bạn. Dưới đây là một số điều bạn có thể làm để ngăn chúng tích tụ và gây rắc rối.
Store Your Headphones Properly
Việc trang bị bộ lưu trữ chuyên dụng cho tai nghe khi bạn không sử dụng có thể giúp ích rất nhiều trong việc duy trì tuổi thọ của tai nghe.
Nằm trong hộp hoặc túi có nghĩa là không có nhiều chỗ cho tai nghe của bạn.. Ngoài ra, một số trong số chúng còn có các khe cắm được chỉ định để giữ cho dây tai nghe của bạn an toàn không bị xoắn.
Coil Headphones the Right Way
Cuộn dây tai nghe đúng cách trước khi cất giữ cũng giúp ngăn ngừa tình trạng bị xoắn. Most of us coil our cords around our hands, twisting the cord with every single turn.
This method is incorrect as each coil creates a twist in the cord, which becomes apparent when you unfold it.
Instead, try the ‘over-under’ method, which is commonly used by backstage production crews worldwide.
- Start with the end of the wire in one hand, then slide your other hand a little way down the wire and make the first coil.
- For the next coil, twist your hand so your palm is facing outwards. Grab the wire with your palm in that position.
- Then as you’re bringing the wire up to coil it, twist your palm back inwards.
- Continue alternating both steps until you completely wrap the wire.
Phần kết luận
After reading this guide, bạn nên biết cách làm thẳng dây tai nghe và giữ chúng an toàn khỏi bị xoắn và tích tụ khó chịu. Lần tới khi bạn đeo tai nghe vào, chỉ cần nhớ rằng những chuyển động nhỏ nhất có thể dẫn đến một mớ hỗn độn. Chúng tôi hy vọng bài viết này sẽ giúp ích cho bạn nhiều!
