你想唔想 Pair Tribit FlyBuds 3 耳機 去你嘅裝置? Tribit FlyBuds 3 Headphones have the amazing IPX7 waterproof certification, 藍牙 5.0, dynamic EQ, a battery life of about 5 小時 + 95 amazing hours using the charging case, a working range of 10 米, 等陣.
But if you want to pair them to your devices, and you have no idea, don’t fret in this post we give you a complete guide. 所以, 我哋開始啦!
點樣配對 Tribit FlyBuds 3 耳機?
To pair Tribit FlyBud 3 耳機 with different devices follow the given different devices steps.
Pair With IOS and Android
- Take out the earbuds from the charging case. 佢哋會自動開.
- 然之後, a red light starts flashing on the earbuds, which means that they will be ready to pair with any device.
- Turn on Bluetooth on your device.
- 去裝置嘅藍牙設定.
- 現時, select Tribit FlyBuds 3. If prompted for a password type 0000.
- 然之後, 紅燈會熄咗, 同埋配對就會完成.
Pair With PC (窗戶)
- 第一, turn on Bluetooth on your PC.
- 去設定, go to Bluetooth and other devices.
- 撳一下 [ 新增裝置 ].
- 現時, take the earbuds from the charging case. 然之後, 耳機會自動開.
- When a red light starts flashing on the earbuds, it means that they will be ready to pair with any device
- Select Tribit FlyBuds 3. If needed for a password, 種類 0000.
- 然之後, 紅燈會熄咗, 同埋配對就會完成.
How to Wear These Earbuds
- 將兩個耳機從充電盒中取出.
- 識別咗右耳塞.
- Choose the ear tips that best suit and fit in your ears.
- Insert the headphones into the inner canal of the ears.
- 旋轉以獲得最佳舒適度同最佳貼合度, 同埋確保麥克風指向個口.
How to Turn Off and On
開
Take out the earbuds from the charging case. 然之後, 耳機會自動開.
閂咗佢
Place the earbuds into the charging case and close its lid. 然之後, 耳機會自動閂.
How to Control
- Press the multifunction touch button on any of the earbuds two times to play or pause.
- Press and hold the multifunction touch button on the right earbud to turn the volume up.
- Press and hold the multifunction touch button on the left earbud to turn the volume down.
- Press the multifunction touch button on any of the earbuds three times to play the next track.
- Press the multifunction touch button on any of the earbuds two times to answer an incoming call.
- Press the multifunction touch button on any of the earbuds two times to end a call.
- Press and hold the multifunction touch button on any of the earbuds for 2 秒就可以拒絕來電.
- Press the multifunction touch button on any of the earbuds three times to activate the voice call.
筆記薄: The multifunction touch sensor is placed on the circular part on the top of the earbuds.
How to Reset the Tribit FlyBuds 3 耳機
To reset the Tribit FlyBuds 3 Earbuds delete all pairing information from the connected device. Place both earbuds in the charging case with the cover open, and press and hold the charging case button until the four indicator lights of the charging case flash 4 times at the same time, which shows that the earbuds successfully reset.
FAQS to Pair Tribit FlyBuds 3 耳機
Are the Tribit FlyBuds 3 Earbuds waterproof?
係, the Tribit FlyBuds 3 Earbuds are waterproof (IPX6 and up). 佢哋有 IPX7 嘅評分, 即係話佢哋唔單止反對水，亦都受到浸泡嘅影響.
Does the Tribit FlyBuds 3 Earbuds have a microphone?
係, these earbuds come with integrated microphones.
Does the Tribit FlyBuds 3 Earbuds have a low latency/gaming mode?
唔得, these earbuds don’t have a low latency/gaming mode.
Can the Tribit FlyBuds 3 Earbuds connect to a PC and Laptop?
係, these earbuds can connect to PCs, 手提電腦, and even tablets.
Are the Tribit FlyBuds 3 Earbuds noise-canceling?
唔得! 呢啲耳機冇降噪技術.
結論
We hope you know how to Pair Tribit FlyBuds 3 耳塞到你嘅裝置, and also know how to wear, how to reset, and to control them. 希望呢篇文章可以幫到你好多!
