How to Pair Anker Zolo Liberty Earbuds? 这 Anker Zolo Liberty Earbuds come with a battery life of about 8 小时 + up to 100 hours using the charging case, 蓝牙 4.2, two 5.5mm graphene dynamic drivers, support for the AAC and SBC audio codecs, the IPX5 sweat and dust-proof certification, 以及更多.
Pairing Anker Zolo Liberty 耳塞 to various devices is easy, but most people don’t know how to Pair Anker Zolo Liberty Earbuds. Don’t worry after reading this article you will be able to Pair Anker Zolo Liberty Earbuds to your devices. 让我们开始吧!
How do you Pair Anker Zolo Liberty Earbuds?
Pairing Anker Zolo Liberty Earbuds is a simple and easy process.
- Please take out the earbuds from the case, they will automatically turn on and in pairing mode. 还, you can press and hold the multifunction button for about 1 第二.
- 然后, go to settings and turn on the Bluetooth on your device.
- Select Zolo Liberty Earbuds from the list on your device and tap on it to pair.
- If prompted a Password Enter 0000.
How Do You Pair Anker Zolo Liberty Earbuds to IOS and Android Devices?
- 第一的, 打开充电盒，取出耳机. 在那之后, they will turn on automatically. If does not turn on automatically, you can press and hold the multifunction touch button on both earbuds for about 1 第二.
- 然后, turn on Bluetooth on your device.
- Go to the device’s Bluetooth settings.
- Select Zolo Liberty. 如果需要密码, 类型 0000. 在那之后, 配对将完成.
How Do You Pair Anker Zolo Liberty Earbuds with a PC?
- Turn on Bluetooth on your PC.
- 前往设置.
- Go to Bluetooth and other devices.
4. 现在, 打开充电盒，取出耳机. 在那之后, they will turn on automatically. 还, you can press and hold the multifunction touch button on both earbuds for about 1 第二.
5. Select Zolo Liberty. 如果需要密码, 类型 0000. 在那之后, 配对将完成.
How to Wear Zolo Liberty Earbuds?
Take both earbuds out of the charging case. 识别左右耳塞. 选择最适合您耳朵的耳塞. 将耳塞插入耳道内. Rotate for the best possible comfort and best fit, 并确保麦克风指向嘴部.
How to Reset the Zolo Liberty Earbuds?
将耳机从充电盒中取出. Press and hold the multifunction touch button on both earbuds for about 5 秒, or until a red light starts flashing on the earbuds.
Press and hold the multifunction touch button on both earbuds for about 8 seconds or until a pink light starts flashing on the earbuds. Place both earbuds into the charging case.
The right earbud will automatically re-pair to the left earbud. Delete all Zolo Liberty pairing information from the connected device. 在那之后, the resetting will be done.
How to Control?
- To play or pause a song press the multifunction touch button on any of the earbuds 1 时间.
- Play the next song press and hold the multifunction touch button on the right earbud for about 1 第二.
- Play the next previous press and hold the multifunction touch button on the left earbud for about 1 第二.
- Answer an incoming call by pressing the multifunction touch button on any of the earbuds 1 时间.
- End a current call press the multifunction touch button on any of the earbuds 1 时间.
- 拒接来电 按住任一耳塞上的多功能触摸按钮约约 1 第二.
- Transfer a call from the earbuds to the connected device press and hold the multifunction touch button on any of the earbuds for about 1 第二.
- Switch between a held call and an active call press and hold the multifunction touch button on any of the earbuds for about 1 第二.
- To activate the voice assistant press the multifunction touch button on any of the earbuds 2 次.
FAQS to Pair Anker Zolo Liberty Earbuds?
Are Anker Zolo Liberty Earbuds waterproof?
不, the Anker Zolo Liberty is not waterproof. They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.
What Do If the Microphone is not working?
If the Microphone is not working it can be because the microphone is muted, or the earbuds are badly positioned. 要解决这个问题, you can do the following
If the microphone is muted, check the device microphone volume. 如果这不起作用, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.
How to Know when the Anker Zolo Liberty Earbuds are fully charged?
当耳机充电时, some lights are on. When fully charged, all lights turn off from the charging case.
结论
We hope after reading this article you will know how to Pair Anker Zolo Liberty Earbuds to your devices.
The pairing process is so simple and easy just follow the above-mentioned steps carefully without skipping any step, otherwise you can not complete the pairing process. 我们希望这篇文章能给您带来很大帮助!
