Do you want to Pair JBL Endurance Peak II Earbuds 到您的设备? The JBL Endurance Peak II Earbuds have 6 hours of battery life and 2 hours of charging time, 蓝牙 5.0 with 10 meters of working range, a 10mm dynamic driver, support for the A2DP 1.3, AVRCP 1.5, and HFP 1.7 profiles, the amazing IPX7 water-proof certification.
But if you don’t know how to Pair JBL Endurance Peak 2 Earbuds to your devices, don’t fret in this post we will give you a complete instruction to Pair JBL Endurance Peak II Earbuds with different devices.
How to Pair JBL Endurance Peak II Earbuds
Below we describe easy steps to Pair JBL Endurance Peak 2 Earbuds to different devices. 让我们开始吧.
Pair JBL Endurance Peak II Earbuds with IOS and Android devices
You can pair JBL Endurance Peak II Earbuds with IOS and Android devices by helping these steps.
- 首先, 打开充电盒，取出耳机. 在那之后, a blue light will start flashing, and the earbuds will turn on automatically.
- 现在, turn on Bluetooth on your device.
- Go to the device’s Bluetooth settings.
- Select JBL Endurance Peak II. 如果提示输入密码, 类型 0000. 在那之后, a blue light will start flashing, and the pairing will be done.
Pair JBL Endurance Peak II Earbuds with PC
- 第一的, 转至“设置”以打开电脑上的蓝牙 > 设备 > 蓝牙 & 其他设备.
- 然后, 打开充电盒，取出耳机. 在那之后, a blue light will start flashing, and the earbuds will turn on automatically.
- 现在, select JBL Endurance Peak II. 如果需要密码, 类型 0000.
- 在那之后, a blue light will start flashing, and the pairing will be done.
How to Wear JBL Endurance Peak II Earbuds
Take both earbuds out of the charging case. 识别左右耳塞.
选择最适合您耳朵的耳塞. 现在, insert the headphones into the inner canal of the ears. Rotate for the best possible comfort and best fit, 并确保麦克风指向嘴部.
How to Turn On and Off JBL Endurance II Earbuds?
打开
To turn on open the lid of the charging case and take the earbuds out. 在那之后, a blue light will start flashing, and the earbuds will turn on automatically.
关
To turn off place the earbuds into the charging case and close its lid. 在那之后, the earbuds will turn off automatically.
How to control
- Play or pause a songpress the touch panel on the right earbud one time.
- Turn the volume up, slide up the touch panel on the right earbud.
- Turn the volume down, slide down the touch panel on the right earbud.
- Play the next song, press the touch panel on the left earbud one time.
- Play the previous song,press the touch panel on the left earbud two times.
- Answer an incoming call, press the touch panel on any of the earbuds one time.
- End a current call, press the touch panel on any of the earbuds one time.
- Reject an incoming call, press the touch panel on any of the earbuds two times.
- Mute or unmute the microphone, press and hold the touch panel on any of the earbuds for 2 秒.
- Activate the voice assistant, press the touch panel on the right earbud one time.
如何激活单声道模式
To activate the mono mode in JBL Endurance Peak II earbuds, you have to pair the earbuds to your device and take out one of the earbuds that you want to use from the charging case. 它将开始自行工作.
How to Reset the JBL Endurance Peak II Earbuds
- Delete all JBL Endurance Peak II pairing records on the connected device. Place both earbuds into the charging case.
- Press and hold the touch panel on both earbuds for 20 秒, or until a red light turns on.
- Wait until it turns off. 在那之后, the resetting will be done.
- 现在, again pair them with your device.
FAQS to Pair JBL Endurance Peak II Earbuds
Is the JBL Endurance Peak II waterproof?
是的, the JBL Endurance Peak II is waterproof. 它们的防护等级为 IPX7, 这意味着它们不仅防水，而且还可以免受浸泡的影响.
Does the JBL Endurance Peak II have a microphone?
是的, the earbuds come with integrated microphones.
Are the JBL Endurance Peak II noise-canceling?
不. These earbuds don’t come with noise-cancellation technology.
How do we know when the JBL Endurance Peak II is fully charged?
当耳机充电时, a light is on. When they are fully charged, the light turns off.
结论
We hope after reading this article you will be able to pair them to your desired device, how to wear them, how to activate Mono Mode, and how to reset them. 我们希望这篇文章能为您提供有关该产品的很多帮助!
