Na sala me sema kina na Baseus Encok W01 Earbuds? Ena Gauna Oqo

Do you want to Connect Baseus Encok W01 Earbuds to your devices? The Baseus Encok W01 is the best choice comes with a battery life of 6 auwa, HFP, HSP, A2DP, AVRCP, SPP, PBAP compatibility, Mo ni vakasama kina 5.0, a charging case with a battery of 2000mAh, the IPX4 sweat and dust-resistant certification, ka e vuqa na ka.

But here we learn how to Connect Baseus Encok W01 iTuvaki ni Daliga kei na dua na ituvatuva .. Sa, se qai tekivu .!

Na sala me sema kina na Baseus Encok W01 Earbuds?

Connecting Baseus Encok W01 Earbuds to your devices is a simple process. To connect them to your devices follow the below given steps carefully.

Connect Baseus Encok W01 Earbuds with Android

1. iMatai,dolava na kisi jaji ka taura na daligana .. Ni oti oya, a blue light will be on for 1 ikarua, and they will turn on automatically.
2. A blue light will start flashing in both earbuds when a blue light starts flashing quickly on the left earbud and once every 5 seconds on the right earbud, it means that the earbuds are now in pairing mode.
3. Ena gauna oqo, go to the Android device’s Bluetooth settings.
4. Qai, select Baseus Encok W01. Kevaka e vakauqeta e dua na vosanicuru ., mataqali 0000.
5. Ni oti oya, the pairing process will be done.

Connect Baseus Enock W01 Earbuds with PC

1. iMatai ni, turn on the Window’s Bluetooth.
2. Lako ki na ituvatuva., and go to Bluetooth and other devices.
3. Qai, click on Add device and click on Bluetooth.
4. Qai, dolava na kisi jaji ka taura na daligana .. Ni oti oya, a blue light will be on for 1 ikarua, and they will turn on automatically.
5. When a blue light starts flashing quickly on the left earbud and once every 5 seconds on the right earbud, it means that the earbuds are now in pairing mode.
6. Select Baseus Encok W01. If ask for a password, mataqali 0000.
7. Ni oti oya, the pairing process will be done.

How to Wear the Earbuds?

1. Take out both earbuds from the charging case and identify the left and right earbuds. Digitaka na daligana vinaka duadua e ganita na daligamu ..
2. Vakacuruma na daligana ki na ibinibini ni daligana na daligana ..
3. Rotate the earbuds for the best possible comfort and best fit, ka mo vakadeitaka ni o koya na microphone e dusia tiko na gusu ..

How to Turn On and Off the Earbuds?

Bate

There are two methods to turn on the earbuds.

1: vakasisila

2: ti

vakasisila

1. To automatically turn on the earbuds open the charging case and take the earbuds out.
2. Ni oti oya, a blue light will be on for 1 ikarua, and they will turn on automatically.

ti

1. To manually turn on the earbuds press and hold the multifunction button on both earbuds for 2 sekodi.
2. Ni oti oya, a blue light will be on for 1 ikarua, and they will turn on.

Jisi

There are two methods to turn off the earbuds.

1: vakasisila

2: ti

vakasisila

1. In this method place the earbuds into the charging case.
2. Ni oti oya, a red light will be on for 1 ikarua, and they will turn off automatically.

ti

1. In this method press and hold the multifunction touch button on both earbuds for about 4 sekodi.
2. Ni oti oya, a red light will be on for 1 second and then will turn off.

Control Instructions

1. Press the multifunction touch button on any of the earbuds one time to play or pause music.
2. Press and hold the multifunction touch button on the right earbud for about 1 second to play the next song.
3. Press and hold the multifunction touch button on the left earbud for about 1 second to play the next song.
4. Press the multifunction touch button on any of the earbuds one time to answer an incoming call.
5. Press the multifunction touch button on any of the earbuds one time to end a current call.
6. Press ka taura tu na multion e tara na bulukau ena dua vei ira na isaluwaki ni daliga me baleta na . 2 na sekodi me ra besetaka e dua na kaci ni veiciqomi ..
7. During a call, press and hold the multifunction touch button on the left earbud for 1 second to switch from the earbuds to the connected device. Do the same to switch back to the earbuds to the redial audio switch.
8. When there is an incoming call, press the multifunction touch button on any of the earbuds once to answer the first call. When the second call is coming, press once to answer call 2, and press and hold to switch between them to a multi-party call.

Ka mena Vakadonui kina na Mono?

To activate or deactivate the mono mode in the Baseus Encok W01, take out one of the earbuds from the charging case that you want to activate. Ena tekivu ga ena cakacaka vakataki koya ..

E na liutaka na i tutu ni Cakacaka Levu .?      

iTuvaki ni Daliga

Me vakayacori kina na daligada na daligada ., simply place them into the charging case and close it properly. Ena tekivu na changud na chargilly ..

Vakaliuci kisi ni kisi ni kisi ni kisi.

Me beitaki na kisi jaji ., all you have to do is connect the case to a USB charger or charging port. Sa na tekivu sara ga na chartomatically ..

iCavacava

Connecting Baseus Encok W01 Earbuds to your devices is a simple process. You can Connect Baseus Encok W01 Earbuds to your devices by following the above-mentioned process. Sa, all you need to know is how to Connect Baseus Encok W01 Earbuds. Keitou nuitaka ni na vukei iko vakalevu na ulutaga oqo!