How to Connect Mifo Earbuds? Right Now

You are currently viewing How to Connect Mifo Earbuds? Right Now

How to connect Mifo Earbuds? The Mifo is a wireless earbud set that allows you to connect via Bluetooth to your phone or other Bluetooth devices without the need for cables and allows you to have maximum freedom of movement. 

The Mifo’s earbuds have 6-mic noise canceling, the gaming, and ANC modes, the IPX7 certification, a battery life of about 6 hours + 34 using the charging case, and much more. But on the other hand, most people don’t know how to connect Mifo earbuds to their devices.

Don’t fret in this article we give you a complete guide to Connect Mifo Earbuds and all-about things. Let’s get started!

How To Connect Mifo Earbuds?

Mifo earbuds are designed to connect to multiple devices. To connect them to your devices follow the instructions carefully.    

To iOS and Android phones

  • First, take both earbuds out of the charging case. They will automatically turn on and be ready to pair.
  • To put them in the pairing mode press and hold the power on/off button on both earbuds for 3 seconds.
  • Now go to the Bluetooth settings on your Android device.
  • Select Mifo_O5. If it prompts a password, type 0000.
  • After that, the pairing will be done.

To PC (Windows)

  • Turn on the Window’s Bluetooth.
  • Go to the settings and go to Bluetooth and other devices.
  • Now click on Add device and click on Bluetooth.
  • Take out both earbuds from the charging case. They will automatically turn on and be ready to pair.
  • But, if they are not automatically ready to pair put them in pairing mode press and hold the power on/off button on both earbuds for 3 seconds.
  • Then, select Mifo_O5. If a password is needed, type 0000.
  • After that, the pairing process will be done.

How To Change The Mifo Earbuds Language?

If, you want to change the earbud language, press the power button on the right earbud 5 times in succession to cycle through available languages. Listen for the correct language voice prompt to confirm you have selected a new language.

How To Wear These Earbuds?

Choose the ear tips that fit your ears the best. Identify the left and right earbuds. Slowly rotate each earbud toward your face. Each ear is slightly different, and the position and preferred ear tip can vary. Fine-tune the rotation back and forth until you reach a comfortable angle.

How To Turn On And Off?

Turn on

Take the earbuds out of the charging case. They will automatically turn on. If they are not turned on automatically press and hold the power on/off button on any of the earbuds for 1 second. The earbuds will turn on.

Turn off

If you want to turn off your earbuds place the earbuds into the charging case. They will automatically turn off. If they are not turned off automatically press and hold the power on/off button on any of the earbuds for 5 seconds. A red light will flash twice and the earbuds will turn off.

How To Activate the Mono Mode?

To Activate the Mono Mode remove the desired earbud from the charging case. It will automatically turn on and be ready to pair.

  • Press and hold the earbud’s power on/off button for 3 seconds.
  • Go to the Bluetooth settings.
  • Select Mifo_O5. If a password is needed, type 0000.
  • After that, the pairing will be done.

Control Instructions

The multifunction touch button is placed on the top part of the earbuds. You can use these buttons to play and pause music, answer, or end a call. To control these things follow the given below steps

  • Press the power on/off button on any of the earbuds once to play and pause music.
  • Press the button on the right earbud to turn the volume up.
  • Press the button on the left earbud to turn the volume down.
  • Press and hold the volume button on the right earbud for 2 seconds to go to the next track.
  • Press and hold the button on the left earbud for 2 seconds to play the previous track.
  • Press the power on/off button on any of the earbuds once to answer the incoming call.
  • Press the power on/off button on any of the earbuds once to end a call.
  • Press the power on/off button on any of the earbuds twice to reject an incoming call.
  • Press and hold the power on/off button on any of the earbuds for 2 seconds to transparency mode.

How To Charge The Earbuds and Charging Case?      

Earbuds

To charge the earbuds, simply place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, plug a 5V USB Type-C cable into the port on the charging case. It will start charging automatically.

How To Reset Mifo Earbuds?

To reset the Mifo earbuds follow the given below steps carefully

  • First, forget the Mifo_O5 device from the list of Bluetooth devices.
  • Put both earbuds into the charging case for about 5 to 10 seconds and then remove the earbuds from the charging case.
  • Then, turn off them by pressing and holding the power on/off button for about 5 seconds.
  • Now, press and hold the power on/off button on both earbuds once again for about 10 seconds until a red light blinks twice.
  • Place both earbuds into the charging case for about 5 to 10 seconds.
  • After that, remove the earbuds from the charging case and wait to listen to the message Dual earbuds pairing is successful and the resetting will be done.

Conclusion

Mifo earbuds are designed to connect to multiple devices. These useful devices are also
water and sweat-resistant. If you want to connect your newly purchased earbuds to your
devices then you can follow the above-mentioned process.

After connecting, these earbuds let you enjoy the fullest benefits. So that’s all you need to know How to connect Mifo Earbuds to your device. We hope this article will help you a lot!

Leave a Reply