How to Pair Enacfire E18 Earbuds?

You are currently viewing How to Pair Enacfire E18 Earbuds?

Do you want to pair Enacfire E18 Earbuds with your devices? Enacfire E18 Earbuds connection range up to 33 ft as long as your device is within the range, Enacfire E18 Bluetooth earbuds guarantee you quality music better than the wire-embedded earphones.

E18 wireless Bluetooth earbuds can last over 4 hours of talking Time and 2.5-3 hours of music playtime on a single charge. While on the go the portable charging case power can last up to 15 hours (recharge up to 4-5 times full charge for the Bluetooth earphones). You can go for a day without power.

But if you do not know how to pair them with your devices. We give you a complete guide to pairing, charging, and how to control them. So, let’s get started and dive into the details!

How to power Off and On

Power On

1: Power On Manually

To power on the Enacfire E18 Earbuds press and hold the multi-function button for 2 seconds. The LED lights flash for 1 second with the voice prompt power on.

2: Power On Automatically

Take out the Earbuds from the dock, they will automatically power on with the voice prompt power on.

Power Off

1: Power Off Manually

Press the multi-function button for 4 seconds, and the white LED light flashes for 1 second, with the voice prompt powered off.

2: Power Off Automatically

Put the earbuds back into the dock they will automatically power off.

How to Pair Enacfire E18 Earbuds

To pair Enacfire E18 Earbuds to your device follow the steps carefully.

  1. First, take out the earbuds from the dock they will automatically on. If they do not power on, power on them by pressing and holding the multi-function button for 2 seconds until the LED lights flash blue.
  2. Then, wait 2 seconds for the left and right headset to be connected automatically. The main earbud (the left one) will be on pairing mode with LED light flashing in blue and white alternatively.
  3. Now, on your device go to settings and turn on the Bluetooth.
  4. After a few seconds, a list appears on your device, from the list search Enacfire E18 and select it to pair with your device.
  5. If asking for a PIN enter 0000.
  6. Now, your earbuds are connected to your device and ready to use.

How to Control the Earbuds


Press the multi-function button on any earbuds to answer or end a call.

Double-press the multi-function button to reject a call.

Voice Dialing

Long press the multi-function button (the left one) for 1 second to start the voice dial function of the mobile phone. Press the multi-function again for 1 second to exit from the voice dialing mode.

Adjust the Volume and Play Music

  1. Press the multi-function button to play and pause the music.
  2. Double-press the multi-function button to skip the next track.
  3. Press the right earbud to increase the volume.
  4. Press the left earbud to down the volume.

Charging and Battery Indication

Earbuds Charging

To charge the earbuds put them in the dock they will automatically start charging. It takes about 1 hour to fully charge, and when the earbuds are fully charged the white LED light will turn off.

Dock Charging

To charge the dock use the 5V 1A adapter to charge, otherwise it may damage the Headset. It takes about 2 hours to fully charge, and when the dock is fully charged the blue LED light will turn off.

Dock LED Indicator

Dock battery percentage.

  1. 0 – 25% Blue indicator flashes 1 time every 2 seconds.
  2. 25% – 50% Blue indicator flashes 2 times every 2 seconds.
  3. 50% – 75% Blue indicator flashes 3 times every 2 seconds.
  4. 75% – 100% Blue indicator flashes 4 times every 2 seconds, until it the fully Charged, and the blue light flash stops being light on.

Dock Discharging

  1. 0 – 25% blue indicator flashes 1 time.
  2. 25% – 50% blue indicator flashes 2 times.
  3. 50% – 75% blue indicator flashes 3 times.
  4. 75% – 100% blue indicator flashes 4 times.


  1. Bluetooth version: 4.2
  2. Support HFP, HSP, and AVRCP Bluetooth profiles
  3. Dimension:20 x 16 x14.5mm
  4. Support iPhone/iPad battery indication
  5. Bluetooth normal distance range: 10M
  6. Battery Capacity
  7. Headsets: 50mAh
  8. Dock: 500mAh
  9. Talk/Music time: 2.5-3H
  10. Standby time: 240H
  11. Support Voice Prompt


We hope after reading this article you will be able to pair Enacfire E18 Earbuds with your desired device, how to use. How to charge it, how to control it, and its specifications. So, all you need to know is how to pair Enacfire E18 Earbuds. We hope this article will help you a lot about this product!

Leave a Reply