Puas yog koj xav paub txog yuav ua li cas Txuas Ob Bitty Boomers rau Ntaus Ntawv, tom qab ntawd tsis txhob txhawj xeeb, Ntawm no yog txhua yam koj yuav tsum paub. Peb tab tom yuav tham txog Txuas Ob Bitty Boomers rau Ntaus Ntawv, tab sis ua ntej sib tham txog nws peb yuav tsum paub yuav ua li cas txuas Bitty Boomers. Li ntawd, yog li, Cia Peb Pib...
Txuas Bitty Boomers rau Ntaus Ntawv
Txhawm rau txuas ob bitty boomers rau ntaus ntawv, Koj yuav tsum ua raws li cov kauj ruam nram no:
- Ua ntej no, you have to Turn ON by pressing the (9 Button for about 3 vib nas this).
- As you press, a blue LED light will light up then it will flash quickly that it is now in pairing mode.
- Tam sim no, you have to locate Bitty Boomers in your device’s Bluetooth menu and then select Bitty Boomer.
- When pairing is finalized, a tune will sound.
Txuas Ob Bitty Boomers Rau Ntaus Ntawv
To Connect Two Bitty Boomers to Device, Koj yuav tsum ua raws li cov lus qhia no:
- Ua ntej no, you have to ensure that no Bitty Boomer speakers are currently paired or connected to the device.
- After ensuring that, you have to Power ON 2 speakers (1 at a time).
- Tam sim no, you have to double click Button on the 2nd speaker. Ces, you will hear a chirp sound and the opposite speaker should create a short connect sound. (If you do not hear this connect sound, you have to double click on the opposite speaker Button).
- Ces, you have to locate and select Bitty Boomer in the Bluetooth menu of your device.
- And now, you will be connected to your both speakers successfully.
FAQs Ntawm Txuas Ob Bitty Boomers Rau Ntaus Ntawv
Yuav Ua Li Cas Them Bitty Boomers?
You have to insert the Micro USB charging cable into your speaker port which is located on the back of the speaker. Tam sim no, you have to plug USB end of the charging cord into a USB computer port or a USB plug/adapter. The LED indicator light will turn off if your speakers are fully charged.
Yuav Ua Li Cas Yog Cov Ntaub Ntawv Txog Kev Nyab Xeeb Txog Bitty Boomers?
Don’t expose your Bitty Boomers on direct sunlight, don’t expose to heat or open flame. Never use your speaker on airplane. Don’t try to disassemble or modify. your speaker.
Vim li cas lub teeb ntsais muag ntawm koj tus hais lus Bitty Boomer?
The light is Blinking on the bottom of Bitty Boomer to indicate that the battery of your speakers is low. Li ntawd, yog li, you have to try to fully charge your speaker and see if that helps.
Qhov twg yog lub pob pib dua ntawm koj tus hais lus bluetooth?
To reset you have to hold button combination like Bluetooth button, power button, and or a volume button. You have to check the manual for more details. As an alternative: If the button combination trick doesn’t work, then you have to search for a pinhole button which is labeled as reset. A few manufacturers utilize this procedure of resetting their speakers.
Muaj pes tsawg Bitty Boomers hais lus tuaj yeem ua khub ua ke?
2 Bitty Boomers
Your one phone or one device will let you pair a maximum of 2 Bitty Boomers together. Tsis tau, not all the Bitty Boomers will connect.
Xaus
Hopefully, this article will help you a lot. After reading this article you can easily Connect Two Bitty Boomers to Device. Rau qhov no, you just have to follow the above-mentioned instructions carefully!
