Piv txwv tias koj nkees ntawm kev txuas rau Brookstone pob ntseg pob ntseg thiab tsuas yog tsis meej pem. Tsis txhob txhawj, in this article, Peb qhia peb cov kev paub dhau los ntawm ob peb kauj ruam los ua ke koj lub pob ntseg rau koj lub cuab yeej ua tiav. Cov pob ntseg no yog txoj hauv kev zoo tshaj plaws los mloog suab paj nruag thaum mus. Ua ntej koj tuaj yeem txaus siab rau koj cov nkauj, Koj yuav tau ua khub rau koj lub cuab yeej.
Ib yam uas yuav tsum nco ntsoov ua ntej txuas koj lub pob ntseg Brookstone rau koj lub cuab yeej yog tias koj lub pob ntseg yuav tsum tau them tag nrho.
Pair The Brookstone Earbuds
To pair Brookstone Nano Touch earbuds,
Thawj, put them into pairing mode by holding down the button on the side of the earbud for 3 seconds.
Go to the settings menu on your device and turn ON the Bluetooth.
Then select the Brookstone Earbuds on the available list on your device and tap on it.
Tom qab ob peb vib nas this., the earbud’s light stopped flashing, and heard a voice Txuas from the earbuds.
Now you can start to listen to your favorite track.
Yuav ua li cas them lub pob ntseg pob ntseg
Here are the four easy steps to charge the earbuds.
Thawj, open the charging case.
Then put the earbuds inside the charging case. (If the charging case is itself charged).
The earbuds charging starts automatically.
Now Check the charging indicator light to see if the earbuds are fully charged.
FUNCTIONS
Adjust Volume
Adjusting the volume of Brookstone earbuds is so easy.
Increase The Volume
To increase the volume tap the Right Earbud.
Decrease The Volume
To decrease the volume tap the Left Earbud.
Play and Pause the Music
Double-click the left or right earbuds to play or pause the music.
Track Skipping
Next Track
Touch the Right Earbuds to skip the next track.
Past Track
Touch the Left Earbuds to go back to the previous track.
Managing The Call
Answering the Call
Press the power button on the downside of the Right Earbud to answer the call.
Rejecting the Call
Long press the power button on the downside of the Right Earbud to reject an incoming call.
End the Call
Press the power button on the Left Earbuds to end the call.
Switching Between Calls
Here are the steps to follow to switch between the calls.
Double the power button on the Left Earbuds to place the first call on hold and answer the second call.
Again double the power button on the Left Earbuds to switch back to the first call.
Brookstone Earbuds Indicator Light Guide
When the earbuds are in pairing mode the indicator light blinks blue and red.
But when the earbuds were successfully connected the indicator was light solid blue.
In low battery the indicator lights are red.
In charging the indicator light blinks red.
But when the earbuds are off or fully charged there is no light.
Re-establishing Connection
Sometimes the earbuds lose their connection. But don’t worry it is easy.
Follow the bellowing steps
Turn OFF the earbuds.
Remove the existing connections from your device.
Again turn ON your earbuds and put them into pairing mode.
Now select the Brookstone earbuds from the list and click on them.
Xaus
Pairing Brookstone wireless earbuds to your device is a simple process that allows you to enjoy a seamless audio experience. Los ntawm kev ua raws li cov lus qhia ib kauj ruam los ntawm kauj ruam muab, koj tuaj yeem txuas koj lub pob ntseg wireless rau koj lub cuab yeej. Brookstone wireless earbuds provide excellent sound quality and reliable connectivity.
