Kon pa kombiná Anker Zolo Liberty Earbuds?

How to Pair Anker Zolo Liberty Earbuds? E Anker Zolo Liberty Earbuds come with a battery life of about 8 oranan + up to 100 hours using the charging case, Bluetooth 4.2, two 5.5mm graphene dynamic drivers, support for the AAC and SBC audio codecs, the IPX5 sweat and dust-proof certification, e hopi mas.

Pairing Anker Zolo Liberty Earbuds to various devices is easy, but most people don’t know how to Pair Anker Zolo Liberty Earbuds. Don’t worry after reading this article you will be able to Pair Anker Zolo Liberty Earbuds to your devices. Laga nos kuminsá!

How do you Pair Anker Zolo Liberty Earbuds?

Pairing Anker Zolo Liberty Earbuds is a simple and easy process.

1. Please take out the earbuds from the case, they will automatically turn on and in pairing mode. Tambe, you can press and hold the multifunction button for about 1 segundo.
2. Despues, go to settings and turn on the Bluetooth on your device.
3. Select Zolo Liberty Earbuds from the list on your device and tap on it to pair.
4. If prompted a Password Enter 0000.

How Do You Pair Anker Zolo Liberty Earbuds to IOS and Android Devices?

1. Prome, open the charging case and take the earbuds out. Despues di esei, they will turn on automatically. If does not turn on automatically, you can press and hold the multifunction touch button on both earbuds for about 1 segundo.
2. Despues, turn on Bluetooth on your device.
3. Bai na e settingnan di Bluetooth di e aparato.
4. Select Zolo Liberty. Si mester di un password, tipo 0000. Despues di esei, e parehamento lo wordo haci ..

How Do You Pair Anker Zolo Liberty Earbuds with a PC?

4. Aworaki, open the charging case and take the earbuds out. Despues di esei, they will turn on automatically. Tambe, you can press and hold the multifunction touch button on both earbuds for about 1 segundo.

5. Select Zolo Liberty. Si mester di un password, tipo 0000. Despues di esei, e parehamento lo wordo haci ..

How to Wear Zolo Liberty Earbuds?

Saca ambos earbuds for di e caso di carga .. Identifiká e earbuds robes i drechi .. Choose the ear tips that best suit your ears. Insert the earbuds into the inner canal of the ears. Rotá pa e mihó komodidat posibel i mihó ajuste, i hasi sigur ku e mikrofon ta mustra riba e boka.

How to Reset the Zolo Liberty Earbuds?

Saca e earbuds for di e caso di carga .. Press and hold the multifunction touch button on both earbuds for about 5 di dos, or until a red light starts flashing on the earbuds.

Press and hold the multifunction touch button on both earbuds for about 8 seconds or until a pink light starts flashing on the earbuds. Pone tur dos earbud den e kashi di karga.

The right earbud will automatically re-pair to the left earbud. Delete all Zolo Liberty pairing information from the connected device. Despues di esei, e reset lo wòrdu hasí.

Kon pa Kontrolá?

1. To play or pause a song press the multifunction touch button on any of the earbuds 1 ora.
2. Play the next song press and hold the multifunction touch button on the right earbud for about 1 segundo.
3. Play the next previous press and hold the multifunction touch button on the left earbud for about 1 segundo.
4. Answer an incoming call by pressing the multifunction touch button on any of the earbuds 1 ora.
5. End a current call press the multifunction touch button on any of the earbuds 1 ora.
6. Reject an incoming call press and hold the multifunction touch button on any of the earbuds for about 1 segundo.
7. Transfer a call from the earbuds to the connected device press and hold the multifunction touch button on any of the earbuds for about 1 segundo.
8. Switch between a held call and an active call press and hold the multifunction touch button on any of the earbuds for about 1 segundo.
9. To activate the voice assistant press the multifunction touch button on any of the earbuds 2 biaha.

FAQS to Pair Anker Zolo Liberty Earbuds?

Are Anker Zolo Liberty Earbuds waterproof?

No, the Anker Zolo Liberty is not waterproof. They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.

What Do If the Microphone is not working?

If the Microphone is not working it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following

If the microphone is muted, kontrolá e volúmen di e mikrofon di e aparato. Si esei no ta funshoná, esei ta nifiká ku por tin un defekto den e earbuds, so try replacing them or getting a refund.

How to Know when the Anker Zolo Liberty Earbuds are fully charged?

When the earbuds are charging, some lights are on. When fully charged, all lights turn off from the charging case.

Konklushon

We hope after reading this article you will know how to Pair Anker Zolo Liberty Earbuds to your devices.

The pairing process is so simple and easy just follow the above-mentioned steps carefully without skipping any step, otherwise you can not complete the pairing process. Nos ta spera cu e articulo aki lo yuda bo hopi .!