Do you want to pair Tozo A1 Earbuds? Tozo A1 Earbuds have the IPX5 certification, 藍牙 5.3, a battery life of about 6 小時 + 24 using the charging case and a 6mm speaker.
If you have a new pair of Tozo A1 Earbuds and want to pair them to your devices. Pairing them to your devices is a simple process, to do this completely read this article and follow the pairing process. 所以, 我哋開始啦!
How to Pair Tozo A1 Earbuds?
Take out the earbuds from the case and they will automatically be in pairing mode and pair with each other in 10 秒. One of the earbuds flashes red and blue alternately. 現時, search for the pairing name Tozo A1.
How to Pair Tozo A1 Earbuds to IOS and Android Phones?
- Take out the earbuds from the charging case, 同埋耳機會自動開.
- After that when a blue and red light starts flashing in one of the earbuds, they will be ready to pair with any device.
- 然之後, turn on the Bluetooth on the desired device.
- 去你部裝置上面嘅藍牙設定.
- 現時, select Tozo A1.
- If prompted for a password type 0000.
- 然之後, a blue light will start flashing every 3 秒, 同埋配對就會完成.
Pair Tozo A1 Earbuds with a PC (窗戶)
- Turn on the Window’s Bluetooth.
- 去設定.
- Go to Bluetooth and other devices and click on Add device.
- 撳一下藍牙.
- Open the charging case and take the earbuds out. 然之後, 耳機會自動開.
- 然之後, select Tozo A1 If a password is needed, 種類 0000.
- 然之後, a blue light will start flashing every 3 秒, 同埋配對就會完成.
How to Wear Tozo A1 Earbuds
Take both 耳機 out of the charging case. 識別咗右耳塞. 揀最適合你耳仔嘅耳尖. Then insert the headphones into the inner canal of the ears. 旋轉以獲得最佳舒適度同最佳貼合度, 同埋確保麥克風指向個口.
How to Turn On and Off
Turn On
自動上
Open the charging case and take the earbuds out. 然之後, 耳機會自動開.
Manually
You can press and hold the multifunction touch button on both earbuds for about 3 seconds to turn them on.
Turn Off
自動上
Place the earbuds into the charging case and close its lid. 然之後, 耳機會自動閂.
Manually
You can press and hold the multifunction touch button on both earbuds for about 5 幾秒就可以閂佢哋.
Touch Button
- 多功能觸控按鈕放置於耳機機身頂部部分.
- Press the multifunction touch button on any of the earbuds 1 time to play or pause the music.
- Press and hold the multifunction touch button on the right earbud to turn the volume up.
- Press and hold the multifunction touch button on the left earbud to turn the volume down.
- Press the multifunction touch button on any of the earbuds 3 times to play the next song.
- Press the multifunction touch button on any of the earbuds 4 times to play the previous song.
- Press the multifunction touch button on any of the earbuds 1 time to answer an incoming call.
- Press the multifunction touch button on any of the earbuds 1 time to end a call.
- Press and hold the multifunction touch button on any of the earbuds for 2 秒就可以拒絕來電.
- Press the multifunction touch button on any of the earbuds 3 times to activate the voice assistant.
點樣啟動單聲道模式?
To activate the mono mode in the Tozo A1, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. 佢會自己開始運作.
How to Reset the Tozo A1 Earbuds?
Delete all Tozo A1 pairing records on the connected device. Turn off the Bluetooth function on the device. 將兩個耳機從充電盒中取出. Press the multifunction touch button on both earbuds 5 次次, until a red light flashes for 1 第二.
將耳機放入充電盒. 然之後, 重設就會完成.
How to Charge the Earbuds and Charging Case?
耳機
To charge the earbuds, place them into the charging case and close the lid. The earbuds will start charging automatically.
Charging case
To charge the charging case, all you have to do is connect the case to a USB charger or charging port with the included USB-A to C cable.
結論
After reading this article you will be able to pair Tozo A1 earbuds to your devices. Pairing process is an easy process. To do this follow the pairing instruction. 希望呢篇文章可以幫到你好多!
