How to Pair Anker Zolo Liberty Earbuds? 這 Anker Zolo Liberty Earbuds come with a battery life of about 8 小時 + up to 100 hours using the charging case, 藍牙 4.2, two 5.5mm graphene dynamic drivers, support for the AAC and SBC audio codecs, the IPX5 sweat and dust-proof certification, 以及更多.
Pairing Anker Zolo Liberty 耳塞 to various devices is easy, but most people don’t know how to Pair Anker Zolo Liberty Earbuds. Don’t worry after reading this article you will be able to Pair Anker Zolo Liberty Earbuds to your devices. 讓我們開始吧!
How do you Pair Anker Zolo Liberty Earbuds?
Pairing Anker Zolo Liberty Earbuds is a simple and easy process.
- Please take out the earbuds from the case, they will automatically turn on and in pairing mode. 還, you can press and hold the multifunction button for about 1 第二.
- 然後, go to settings and turn on the Bluetooth on your device.
- Select Zolo Liberty Earbuds from the list on your device and tap on it to pair.
- If prompted a Password Enter 0000.
How Do You Pair Anker Zolo Liberty Earbuds to IOS and Android Devices?
- 第一的, open the charging case and take the earbuds out. 在那之後, they will turn on automatically. If does not turn on automatically, you can press and hold the multifunction touch button on both earbuds for about 1 第二.
- 然後, turn on Bluetooth on your device.
- 前往裝置的藍牙設定.
- Select Zolo Liberty. If a password is needed, 類型 0000. 在那之後, the pairing will be done.
How Do You Pair Anker Zolo Liberty Earbuds with a PC?
- Turn on Bluetooth on your PC.
- 前往設定.
- Go to Bluetooth and other devices.
4. 現在, open the charging case and take the earbuds out. 在那之後, they will turn on automatically. 還, you can press and hold the multifunction touch button on both earbuds for about 1 第二.
5. Select Zolo Liberty. If a password is needed, 類型 0000. 在那之後, the pairing will be done.
How to Wear Zolo Liberty Earbuds?
將兩隻耳機從充電盒中取出. 辨識左右耳塞. Choose the ear tips that best suit your ears. Insert the earbuds into the inner canal of the ears. 旋轉以獲得最佳舒適度和最佳貼合度, 並確保麥克風指向嘴部.
How to Reset the Zolo Liberty Earbuds?
將耳機從充電盒中取出. Press and hold the multifunction touch button on both earbuds for about 5 秒, or until a red light starts flashing on the earbuds.
Press and hold the multifunction touch button on both earbuds for about 8 seconds or until a pink light starts flashing on the earbuds. Place both earbuds into the charging case.
The right earbud will automatically re-pair to the left earbud. Delete all Zolo Liberty pairing information from the connected device. 在那之後, the resetting will be done.
如何控制?
- To play or pause a song press the multifunction touch button on any of the earbuds 1 time.
- Play the next song press and hold the multifunction touch button on the right earbud for about 1 第二.
- Play the next previous press and hold the multifunction touch button on the left earbud for about 1 第二.
- Answer an incoming call by pressing the multifunction touch button on any of the earbuds 1 time.
- End a current call press the multifunction touch button on any of the earbuds 1 time.
- Reject an incoming call press and hold the multifunction touch button on any of the earbuds for about 1 第二.
- Transfer a call from the earbuds to the connected device press and hold the multifunction touch button on any of the earbuds for about 1 第二.
- Switch between a held call and an active call press and hold the multifunction touch button on any of the earbuds for about 1 第二.
- To activate the voice assistant press the multifunction touch button on any of the earbuds 2 次.
FAQS to Pair Anker Zolo Liberty Earbuds?
Are Anker Zolo Liberty Earbuds waterproof?
不, the Anker Zolo Liberty is not waterproof. They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.
What Do If the Microphone is not working?
If the Microphone is not working it can be because the microphone is muted, or the earbuds are badly positioned. 要解決這個問題, you can do the following
If the microphone is muted, check the device microphone volume. 如果這不起作用, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.
How to Know when the Anker Zolo Liberty Earbuds are fully charged?
When the earbuds are charging, some lights are on. When fully charged, all lights turn off from the charging case.
結論
We hope after reading this article you will know how to Pair Anker Zolo Liberty Earbuds to your devices.
The pairing process is so simple and easy just follow the above-mentioned steps carefully without skipping any step, otherwise you can not complete the pairing process. 我們希望這篇文章能為您帶來很大幫助!
