How to Connect Dual iPlug Bluetooth?

You are currently viewing How to Connect Dual iPlug Bluetooth?

If you want to connect Dual iPlug Bluetooth, you will be required to keep access to your device’s Network Settings. You have to enter the information on the Dual iPlug device in the Network Settings like the gateway, subnet mask, and IP address.

Well, you will be able to Connect Dual iPlug Bluetooth after entering the whole required information. If after doing this, you are still facing complications in connecting, then you need to make sure that both the Dual iPlug and the Device are connected to the exact network.

More troubleshooting steps can include rebooting the dual iPlug or the device, checking for any blocked ports, reinserting and removing the power cable, or correcting the firmware.

Connect Your Phone to a Dual Radio

To connect your phone to a Dual radio, you have to do these steps:

  • Firstly, you have to ensure that you have both the Dual radio and Bluetooth capabilities of your smartphone turned on or activated.
  • As both Bluetooth settings are enabled, you have to locate the Dual radio in the scanner of your smartphone.
  • When the Dual radio is discovered, you have to choose it to pair with your smartphone.
  • Then, you are required to enter a PIN or passkey to complete the connection, depending on the variety of radio and the phone that you are using. As the connection process is finished, you can listen to your radio on your phone.

Pairing Dual XVM279bt

Well, you have to follow the below-mentioned step-by-step process to pair your Dual xvm279bt device:

  • First of all, you have to ensure that your device is in pairing mode. For this, you will press and hold the Bluetooth button for at least 3 seconds.
  • After that, on your mobile device, you have to turn on Bluetooth. Navigate to the “Settings” of your device and then make sure that Bluetooth is enabled.
  • Now, you have to scan for Bluetooth devices. In the Bluetooth settings, you will start the scan process. So, in the available devices list,  the Dual xvm279bt device should show up.
  • Then, you have to select the Dual xvm279bt device. You will tap on the name of the device to connect.
  • Next, you have to enter the pairing code. Well, to complete the procedure, the pairing code must conform to the code on your device.
  • After that, you have to wait until your device’s status says “Connected.” As this is verified or confirmed, it means you will have successfully paired your Dual xvm279bt device.

Dual Xdm27bt in Pairing Mode

To set a Dual XDM27BT in pairing mode, you have to follow this process:

  • First, you have to turn the device on. You can turn on it just by pressing the power button which is placed on the the front panel of your device.
  • Then, as the device is on, you have to press the source button, This source button is also placed on the front panel of your device, and you will hold this button for 3 seconds.
  • When you have done this it will result in your radio entering “Pairing Mode,” which will let you connect the device to the Bluetooth-enabled device or the phone. If still, the device still does not enter Pairing Mode after holding down the source button, then you have to check your Bluetooth settings and ensure that the Bluetooth settings are allowed or enabled on the device.
  • Moreover, you will try pressing this source button many times to make sure that the device is in the right mode.

Connect XRM47bt Bluetooth

To connect xrm47bt Bluetooth device, you have to follow these steps:

  • First of all, you have to ensure that your device is turned on and the device is in discoverable mode.
  • After that, you will required to enable or allow the Bluetooth feature of your computer to find the device.
  • Now, you have to enter the passkey (if one is needed) after discovering the device. As the device is paired, you will be able to connect and use your device. If still you are facing difficulties connecting your device, then ensure that you are in the xrm47bt Bluetooth device’s range, because if it is out of range it will not be able to be discovered.

Moreover, you must have to ensure that no other wireless networks or Bluetooth devices are in service near your device, as it may result in interference.

App Required for a Dual Radio

It depends on the type of dual radio that you have. In order you have a dual-band CB radio, you may require an application like the Citizen’s Band Radio Service (CBRS) app, which is functional for both Android devices and iOS.

Several dual-band radios may also need a scanner application to obtain and monitor signals. Just like, SDR Touch is one application obtainable for both Android systems and iOS that can be utilized with a software-defined radio (SDR) scanner.

Well, if you have an analog/analog dual-band radio, you may be required to buy an associated mobile application for it to modify settings and maximize its functionality. It is significant to point out that a few dual-radio apps may be specific to the type of dual-band radio you have, so it is reasonable to double-check with your outcome manual or the manufacturer instantly to specify which application is compatible and consistent with your device.

FAQs Of Connect Dual iPlug Bluetooth

What Is the iPlug?

iPlug is an open-source C++ library for making audio plugins, that can be employed in digital audio workstations (DAW) just like FL Studio, Logic Pro, Ableton Live, and more.

Does a Dual Radio have Navigation?

No, the dual radio does not have any navigation abilities. It’s just a term that is utilized to describe the capacity for a radio to have two channels – one of them is for digital streaming services and the other for traditional AM/FM radio.


Hopefully, this article will be very helpful for you, if you read it carefully and follow the above-mentioned instructions. So, keep reading our articles to get the best and easy solution!

Leave a Reply