How to Connect the PLT Earbuds?

You are currently viewing How to Connect the PLT Earbuds?

Are you wondering how to connect the PLT earbuds to your devices? The PLT earbuds are a wireless audio device designed for active individuals. It is a lightweight and comfortable pair of earbuds for extended periods of use. It has a 13.5 mm driver unit, which offers high-quality sound reproduction.

PLT earbuds are equipped with Bluetooth version 5.0, allowing for a wireless range of up to 10 meters. These earbuds support various Bluetooth profiles such as A2DP, AVRCP, HFP, and HSP, ensuring wide compatibility with different devices.

A rechargeable battery with a capacity of 90 mAh powers the earbuds which offer up to 5 hours of continuous audio playback time. You can then conveniently charge using the included USB cable.

These earbuds are designed to be sweat and water-resistant, the Plantronics Backbeat Fit 3100 is ideal for use during workouts and outdoor activities.

So, if you want to connect the PLT earbuds to your devices read the complete article and carefully follow the pairing instructions.

Power on the case

Power on your charging case to power your earbuds for first use. Click and hold the charge case button for 2 seconds to power it on. The charging case LEDs light up.

Power On and Off the Earbuds

You can automatically or manually power on and off the earbuds.


Taking the earbuds out of the case. They will automatically power on. Conversely, putting them back in the case. They will automatically power off and start charging.


Click and hold the earbud button for 2 seconds to manually power it on. To manually power them off, click and hold for four seconds.

Connect the PLT Earbuds with your devices

To connect the PLT earbuds to your devices follow the steps

  1. First, you take your earbuds out of the charging case, and the pairing process begins.
  2. After taking the earbuds out of the case. The LED, located on the right earbud, flashes red and white to indicate pairing mode.
  3. Now, activate Bluetooth on your phone and set it to search for new devices
  4. Select PLT earbuds from the available list.
  5. Once successfully paired, you hear pairing successful and the earbud LED stops flashing.
  6. Now, your earbuds are ready for use.

Charge the Earbuds and the Charging Case


To charge your earbuds, place them in the charging case. They will charge automatically.

Charging Case

To charge the case by plugging it into a computer or USB charging device. For the fastest charging, plug them into a wall charger.

Note: If the charging case has no charge, first charge the case separately, then charge the earbuds.

The Basics

1: Power transfer

If your right earbud loses power, all functions and audio transfer to the left earbud. The left earbud has a touch sensor button. Only a light touch is required.

2: Adjust the volume 

The left earbud has a touch sensor button. Only a light touch is required.

  1. To increase volume, tap the left earbud.
  2. To decrease volume, touch and hold the left earbud

3: Play or pause audio

Click the right earbud to Play or pause audio.

4: Track Selection

Double-click the right earbud to skip to the next track.

Ttriple-click the right earbud to play the previous track.

5: Make/Take/End Calls

Answer or end a call by clicking the right earbud

6: Answer a second call

  1. First, click the right earbud to end the current call.
  2. Then click the right earbud again to answer the new call.

DeepSleep mode

If you leave your earbuds powered on but out of range of your paired device, they conserve power by entering DeepSleep mode after 120 minutes and power off mode after 7 days. To exit DeepSleep mode, choose

  1. After 120 minutes, power on each earbud.
  2. After 7 days, reset by powering off and on.


After reading this article you will be able to connect the PLT earbuds to your devices. Connecting PLT earbuds is a simple process. We hope this article will help you a lot in this case!

Leave a Reply