How to Pair a Blue Parrot Headset with your Smartphone?

Yuav ua li cas rau Pair a Xiav parrot headset nrog koj Smartphone? There are 3 Txoj kev mus pair ib tug xiav parrot headset nrog koj smartphone. Xaiv koj nyiam set ntawm cov lus qhia rau pair ib tug Blue Parrot headset nrog koj smartphone.

Txoj kev:1 Pair siv NFC ib-kov

1. Xyuas kom meej tias koj headset yog on, thiab tias NFC yog enabled rau koj smartphone.
2. Place the NFC zone of your smartphone against the NFC zone of your headset until your smartphone registers the headset.
3. Follow the prompts on your smartphone to complete the pairing.
   Enter 0000 four zeros if you are asked for a PIN code.

Txoj kev:2 Pair siv cov nyees khawm

1. Ensure your headset is off.
2. Press and hold 6 seconds the Multifunction button until you hear Power on. Continue to hold the button until the LED flashes alternating blue and red and you hear Pair mode.
   The headset is now in pairing mode.
3. Go to the Bluetooth menu on your smartphone and select the Blue Parrott B450-XT from the list of available devices.
   Enter 0000 four zeros if you are asked for a PIN code.

Txoj kev:3 Khub siv lub suab hais kom ua

1. Xyuas kom meej tias koj headset yog on.
2. Press the Blue Parrott Button or press and hold the Volume Up button.
3. After the voice prompt, say pair mode. The headset is now in pairing mode.
4. Go to the Bluetooth menu on your smartphone and select the Blue Parrott B450-XT from the list of available devices.
   Enter 0000 (four zeros) if you are asked for a PIN code.

Yuav ua li cas yog tias kuv lub mloog pob ntseg xiav tsis khub nrog kuv lub cuab yeej txawb?

1. If you are having trouble pairing a Blue Parrott headsetwith your smartphone., tablet, or other mobile device, try the following steps. Try re-pairing your Blue Parrott headset after each step.
2. Ua ntej no, on your mobile device, turn the Bluetooth setting off and on. Turn your mobile device off and on and turn your Blue Parrott headset off and on.
3. Ces, try to pair your Blue Parrott headset using a different mobile device. This is to confirm that a different mobile device will find and pair with your Blue Parrott headset.
4. Tam sim no, reset your Blue Parrott headset.
5. If you still cannot connect your headset to your mobile device, contact support.

FAQs los Pair Blue Parrot Headset nrog koj lub xov tooj smartphone

Yuav Ua Li Cas Kuv Manually Reset Kuv Lub Mloog Pob Ntseg Bluetooth?

When you reset your Bluetooth headset, previously paired devices and settings will be cleared. Follow these steps to reset.

1. Thawj, ensure your headset is powered on.
2. Ces, press and hold 6 seconds both the Volume up and down buttons until your head two beeps followed by Pair mode, or until the LED flashes alternating red and blue.

Note: After resetting, you will need to re-pair the headset with your smartphone. Remember to delete the previous pairing before you re-pair.

Kuv puas tuaj yeem ua ke kuv lub mloog pob ntseg nrog ntau dua ib qho Bluetooth ntaus ntawv?

Muaj. Your Blue Parrott headset can be paired with up to eight 8 different devices. If you attempt to pair a 9th device, it will replace the oldest pairing in the existing pairings.

Dab tsi yog tus Passcode lossis PIN rau Pairing Kuv Lub Mloog Pob Ntseg?

If prompted when pairing your headset, the passcode or PIN is 0000.

Xaus

Pair a Blue Parrot Headset with your Smartphone is not a tough task you can do it in a few seconds. We have mentioned 3 different ways to Pair a Blue Parrot Headset with your Smartphone.

You have to follow the suitable methods and their steps carefully without skipping any step to make a proper connection.

Li ntawd, yog li, all you need to know is how to Pair a Blue Parrot Headset with your Smartphone. Zaj no yuav pab koj heev!