Do you want to Pair Altec Lansing NanoPods Earbuds? The Altec Lansing NanoPods have 4 hours of battery life and 16 teev nrog lub thawv them. They have Bluetooth 5.0, IPX5 hws thiab plua plav-resistant ntsuas, 50ft of work range, thiab ntau dua. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
Yuav Ua Li Cas Pair Altec Lansing NanoPods Earbuds?
Yog tias koj xav ua khub Altec Lansing NanoPods Earbuds rau koj cov khoom siv ua raws li cov kauj ruam hauv qab no ua tib zoo yam tsis hla ib kauj ruam.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
Kauj Ruam 1: Nqa tawm lub pob ntseg los ntawm lub thawv them. tom qab ntawd, lawv yuav tig ON tsis siv neeg, thiab lub teeb yuav teeb rau lawv.
Kauj Ruam 2: Tom qab ntawd qhib Bluetooth ntawm koj lub cuab yeej thiab mus rau qhov chaw Bluetooth.
Kauj Ruam 3: Tam sim no, xaiv NanoPods. Yog hais tias prompted rau ib lo lus zais, Nkag mus rau nws 0000.
tom qab ntawd, g, lub pob ntseg yuav muab khub rau koj lub cuab yeej thiab npaj rau kev siv.
How To Pair Altec Lansing NanoPods Earbuds With PC (qhov rais)
Kauj Ruam 1: Ua ntej no, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
Kauj Ruam 2: Tam sim no, go to the settings.
Kauj Ruam 3: Mus rau Bluetooth thiab lwm yam khoom siv.
Kauj Ruam 4: Click on Add device.
Kauj Ruam 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
Kauj Ruam 6: Ces, xaiv NanoPods. If needed a password, Nkag mus rau nws 0000.
After all these steps, g, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods Earbuds.
Kauj Ruam 1: Thawj, take out both earbuds from the charging case.
Kauj Ruam 2: Ces, identify the left and right earbuds.
Kauj Ruam 3: Choose the ear tips that best fit your ears.
Kauj Ruam 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, Xyuas kom lub microphone tig mus rau koj lub qhov ncauj.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
Turn on
Nqa tawm lub pob ntseg los ntawm lub thawv them. tom qab ntawd, you see a light will light up on the earbuds, thiab lawv yuav qhib tsis siv neeg.
Turn off
To turn Off the Earbuds place them into the charging case. They will turn off automatically.
Yuav tswj tau li cas? / How to Operate? – Instructions
NOTE: The multifunction touch sensor is placed on the top part of the earbuds.
- Press and hold the multifunction touch button on the right earbud for about 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Press the multifunction touch button on any of the earbuds one time to answer an incoming call.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Press and hold the multifunction touch button on the left earbud for about 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. It will start working by itself.
Yuav ua li cas them lub pob ntseg pob ntseg?
Earbuds
Txhawm rau them lub pob ntseg pob ntseg, place them into the charging case and close the lid properly. Lub pob ntseg yuav them cia li.
Charging case
Txhawm rau them lub thawv them, connect the case to a USB charger or charging port with the included USB-A to C cable. Nws yuav pib them cia li.
What Do The Lights Mean?
Earbuds
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- Lub teeb liab qhib, ntawm lub thawv them. When the earbuds are charging.
- Lub teeb liab tua ntawm lub thawv them. Thaum lub mloog pob ntseg them tag nrho.
- Lub teeb xiav flashes peb zaug. Thaum lub mloog pob ntseg nyob hauv hom pib dua.
- Lub teeb liab tig xiav. Thaum lub mloog pob ntseg rov pib dua.
Charging case
- Ib lub teeb ci ntsa iab thaum them nyiaj tsawg dua 25% ntawm lub roj teeb.
- Ib lub teeb rau thiab ib qho flashing thaum them nqi yog tsawg dua 50% ntawm lub roj teeb.
- Ob lub teeb ci thiab ib qho flashing thaum them lub rooj plaub muaj tsawg dua 75% ntawm lub roj teeb.
- Peb lub teeb thiab ib qho flashing thaum them nyiaj tsawg dua 100% ntawm lub roj teeb.
- Tag nrho cov teeb qhib thaum lub tooj them tag nrho.
How To Reset Altec Lansing NanoPods Earbuds?
Kauj Ruam 1: Rho tawm tag nrho cov ntaub ntawv khub ntawm NanoPods los ntawm cov cuab yeej sib txuas.
Kauj Ruam 2: Tom qab ntawd nqa tawm ob lub pob ntseg los ntawm rooj plaub. tom qab ntawd, Lawv yuav fais fab rau tsis siv neeg.
Kauj Ruam 3: Tam sim no, nias thiab tuav lub khawm multifunction kov ntawm ob lub pob ntseg rau txog 9 vib nas this. tom qab ntawd, lub teeb xiav yuav ntsais peb zaug, to then turn red and back to blue.
Kauj Ruam 4: Place the earphones back in the charging case. tom qab ntawd, Kev rov pib dua yuav ua tiav.
Troubleshooting tswv yim
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
Yog tias qhov ntawd tsis ua haujlwm, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. To fix this, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Try factory resetting the earbuds.
Lub microphone tsis ua haujlwm
If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:
Check the device microphone volume. Yog tias qhov ntawd tsis ua haujlwm, that means there might be a defect in the earbuds, so try replacing them or getting a refund.
FAQs rau Pair Altec Lansing NanoPods Earbuds
Yog Altec Lansing NanoPods waterproof?
No, the Altec Lansing NanoPods are not waterproof (IPX6 thiab nce mus). They have a rating of IPX5, which means they’re protected against some water projected from a nozzle.
Puas yog Altec Lansing NanoPods muaj microphone?
Muaj, the earbuds come with integrated microphones.
Puas yog Altec Lansing NanoPods muaj hom latency qis / kev ua si?
No, cov pob ntseg no tsis muaj qhov tsis tshua muaj latency / gaming hom.
Yuav ua li cas paub thaum Altec Lansing NanoPods them tag nrho?
When the earbuds are charging, qee lub teeb tig rau lub thawv them. When fully charged, txhua lub teeb tua.
Altec Lansing NanoPods puas tuaj yeem txuas rau PC thiab Laptop?
Muaj, cov pob ntseg no tuaj yeem txuas rau PCs, laptops, thiab txawm tias ntsiav tshuaj.
Puas yog Altec Lansing NanoPods suab nrov tshem tawm?
No! These earbuds don’t come with noise-cancellation technology.
Xaus
Peb cia siab tias koj tam sim no paub yuav ua li cas Pair Altec Lansing NanoPods Earbuds nrog koj lub cuab yeej xav tau. Li ntawd, yog li, tias txhua yam koj yuav tsum paub yog yuav ua li cas Pair Altec Lansing NanoPods Earbuds rau koj lub cuab yeej. Zaj no yuav pab koj heev!
