Je! Unataka kuoanisha manyoya ya nanopods ya altec? Nanopods za Altec Lansing zina 4 masaa ya maisha ya betri na 16 masaa kwa kutumia kesi ya malipo. Wana Bluetooth 5.0, cheti cha IPX5 cha jasho na kisichozuia vumbi, 50ft of work range, Na zaidi. Here you learn how to use them with these new Altec Lansing NanoPods with your devices.
Jinsi ya jozi ya Altec Lansing Nanopods Earbuds?
If you want to pair Altec Lansing NanoPods Earbuds to your devices follow the below-mentioned steps carefully without skipping any step.
How To Pair Altec Lansing NanoPods Earbuds With iOS and Android Phones?
Hatua 1: Ondoa vifaa vya sauti vya masikioni kwenye kipochi cha kuchaji. Baada ya hapo, they will turn ON automatically, and a light will light up on them.
Hatua 2: Then turn on Bluetooth on your device and go to the Bluetooth settings.
Hatua 3: Sasa, select NanoPods. Ukiulizwa nenosiri, aina 0000.
Baada ya hapo, mchakato wa kuoanisha utafanyika, the earbuds will be paired to your device and ready for use.
How To Pair Altec Lansing NanoPods Earbuds With PC (Windows)
Hatua 1: Kwanza kabisa, go to the search bar on your PC Click here type Bluetooth and turn on Bluetooth.
Hatua 2: Sasa, go to the settings.
Hatua 3: Nenda kwa Bluetooth na vifaa vingine.
Hatua 4: Bofya kwenye Ongeza kifaa.
Hatua 5: After that take out the earbuds from the case, they will turn on automatically and you see a light on them.
Hatua 6: Kisha, select NanoPods. If needed a password, aina 0000.
After all these steps, mchakato wa kuoanisha utafanyika, the earbuds pair with your device, and now you can use them.
How To Wear Altec Lansing NanoPods Earbuds?
Here we describe a few steps on how to wear the Altec Lansing NanoPods Earbuds.
Hatua 1: Kwanza, take out both earbuds from the charging case.
Hatua 2: Kisha, identify the left and right earbuds.
Hatua 3: Choose the ear tips that best fit your ears.
Hatua 4: After these steps insert the headphones into the inner canal of the ears, rotate them for the best possible comfort and best fit, na uhakikishe kuwa kipaza sauti inaelekea mdomoni.
How To Turn On And Off Altec Lansing NanoPods Earbuds?
Washa
Ondoa vifaa vya sauti vya masikioni kwenye kipochi cha kuchaji. Baada ya hapo, you see a light will light up on the earbuds, na watawasha kiotomatiki.
Zima
To turn Off the Earbuds place them into the charging case. Watazima kiotomatiki.
Jinsi ya Kudhibiti? / How to Operate? – Instructions
NOTE: The multifunction touch sensor is placed on the top part of the earbuds.
- Bonyeza na ushikilie kitufe cha kugusa chenye shughuli nyingi kwenye kifaa cha masikio cha kulia kwa takriban 2 seconds to play or pause music.
- Press the multifunction touch button on the right earbud two times to play the next song.
- Press the multifunction touch button on the left earbud two times to play the previous song.
- Press the multifunction touch button on the right earbud one time to turn the volume up.
- Press the multifunction touch button on the left earbud one time to turn the volume down.
- Bonyeza kitufe cha kugusa chenye shughuli nyingi kwenye vifaa vya sauti vya masikioni wakati mmoja ili kujibu simu inayoingia.
- Press and hold the multifunction touch button on any of the earbuds for about 2 seconds to end a current call.
- Press the multifunction touch button on any of the earbuds two times to reject an incoming call.
- Bonyeza na ushikilie kitufe cha kugusa chenye shughuli nyingi kwenye kifaa cha masikio cha kushoto kwa takriban 2 seconds to Activate the voice assistant.
How To Activate The Mono Mode?
To activate or deactivate the mono mode in these earbuds, pair the earbuds to the device and take out one of the earbuds from the charging case that you want to use. Itaanza kufanya kazi yenyewe.
Jinsi ya Kuchaji Vifaa vya masikioni?
Earbuds
Kuchaji vifaa vya sauti vya masikioni, place them into the charging case and close the lid properly. Vifaa vya masikioni vitaanza kuchaji kiotomatiki.
Kesi ya kuchaji
Ili kuchaji kesi ya malipo, connect the case to a USB charger or charging port with the included USB-A to C cable. Itaanza kuchaji kiotomatiki.
What Do The Lights Mean?
Earbuds
- A light turns on when you take them out from the charging case. It means the earbuds turn on.
- A red light turns ON, on the charging case. Wakati vifaa vya sauti vya masikioni vinachaji.
- A red light turns off on the charging case. Wakati masikio yanashtakiwa kikamilifu.
- A blue light flashed three times. When the earbuds are resetting mode.
- A red light turns blue. When the earbuds are reset.
Kesi ya kuchaji
- One light flashing while charging is less than 25% of the battery.
- One light on and one flashing while charging is less than 50% of the battery.
- Two lights on and one flashing while charging the case has less than 75% of the battery.
- Three lights on and one flashing while charging is less than 100% of the battery.
- All lights are on while the charging case is fully charged.
How To Reset Altec Lansing NanoPods Earbuds?
Hatua 1: Delete all pairing records of the NanoPods from the connected device.
Hatua 2: Then take out both earbuds from the case. Baada ya hapo, watawasha kiotomatiki.
Hatua 3: Sasa, press and hold the multifunction touch button on both earbuds for about 9 sekunde. Baada ya hapo, a blue light will flash three times, to then turn red and back to blue.
Hatua 4: Place the earphones back in the charging case. Baada ya hapo, kuweka upya kutafanywa.
Vidokezo vya Utatuzi
Left/Right/One side of the earbuds has stopped working
If this issue happens, it may be because it is low on battery or it did not connect correctly with the device. Ili kurekebisha hii, unaweza kufanya yafuatayo:
1. Charge the earbud that is not working or, place both earbuds in the charging case.
2. Factory reset the earbuds.
3. Check if the earbuds are operating within a normal working range
Ikiwa hiyo haifanyi kazi, the earbud is probably faulty.
Left/Right/One side of the earbuds has a low volume
If this happens, it may be because the earbud is dirty or the volume is set low. Ili kurekebisha hii, you can do the following steps.
1. Clean the earbud using a cotton swab or carefully clean the mesh with a pin.
2. Jaribu kuweka upya vifaa vya sauti vya masikioni vilivyotoka nayo kiwandani.
The microphone is not working
If this happens, it can be because the microphone is muted, au vifaa vya sauti vya masikioni vimewekwa vibaya. Ili kurekebisha hii, unaweza kufanya yafuatayo:
Check the device microphone volume. Ikiwa hiyo haifanyi kazi, that means there might be a defect in the earbuds, kwa hivyo jaribu kuzibadilisha au urejeshewe pesa.
FAQs to Pair Altec Lansing NanoPods Earbuds
Are the Altec Lansing NanoPods waterproof?
Hapana, the Altec Lansing NanoPods are not waterproof (IPX6 na juu). Wana ukadiriaji wa IPX5, ambayo ina maana kwamba wanalindwa dhidi ya baadhi ya maji yaliyotolewa kutoka kwa pua.
Do the Altec Lansing NanoPods have a microphone?
Ndio, the earbuds come with integrated microphones.
Do the Altec Lansing NanoPods have a low latency/gaming mode?
Hapana, vifaa vya sauti vya masikioni hivi havina hali ya chini ya kusubiri/kucheza.
How to know when the Altec Lansing NanoPods are fully charged?
Wakati vifaa vya sauti vya masikioni vinachaji, some lights turn on the charging case. Wakati imechajiwa kikamilifu, all lights turn off.
Can the Altec Lansing NanoPods connect to a PC and Laptop?
Ndio, vifaa vya sauti vya masikioni hivi vinaweza kuunganisha kwa Kompyuta, kompyuta za mkononi, na hata vidonge.
Are the Altec Lansing NanoPods noise canceling?
Hapana! Vifaa hivi vya masikioni haviji na teknolojia ya kughairi kelele.
Hitimisho
We hope you now know how to Pair Altec Lansing NanoPods Earbuds with your desired device. Hivyo, that all you need to know is how to Pair Altec Lansing NanoPods Earbuds to your device. Tunatumahi kuwa nakala hii itakusaidia sana!
